|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 4th, 2005, 14:31
|
#1 |
Problems with mp5 by ICS ver.3
Recently I bought an mp5 made by ICS ver.3 with a turbo 2000 motor. Whenever i shoot it, it works pretty good, but every so often (maybe every 100-200 shots) I have to turn the screw on the bottom because the motor/gearbox keeps making a really bad noise and buzzing sound, but it doesn't pull the spring back. It just keeps spinning the motor inside. Even more recently the gun jus stopped working all together. I want to know how i can fiz this problem where i don't have to keep adjusting the screw on the bottom of the grip all the time or if i can't get my gun to work what the problem might be. I'm not sure what to do so some please help me if you have any ideas of what's going on with my gun.
|
|
|
|
|
July 4th, 2005, 14:46
|
#2 |
|
Delierious Designer of Dastardly Detonations
    Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
|
yuk.
Sounds like you have a stripped bevel or pinion gear. Find a gun doctor to check out your gears.
__________________
Want nearly free GBB gas?  |
|
|
|
|
July 4th, 2005, 17:45
|
#3 |
|
Myoga
|
And after you get it working again, once you get the motor height adjusted properly, put some thread lock on it so it won't come loose by itself. Then you shouldn't have to adjust it for a long while.
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
