KWA Mac11a1 problems

Radec · October 6th, 2005, 19:44

Hi, i recently bought a kwa m11a1 and it worked perfectly for a few days and then started to mess up. When i fire a shot either on semi or full auto, the chamber cover and bolt wont return to the cocked position, it keeps trying to cock itself until it runs out of gas.

My only thoughts on why this would happen are:

1.Over-lubricated?
2.Gas (Abbey 134a) no longer powerful enough (unlikely as only had for a few days)
3.Something sticking in the mechanism, creating more friction, stopping it cocking.

These are only guesses however as i am no expert, thts why i came to u guys.
Any help appreciated thnks.

krazie Sj · October 20th, 2005, 01:16

Check inside the gun and see if you have a BB jammed in beside the Gas port.

nutboi · October 20th, 2005, 02:58

use search first and u'll get these
http://www.airsoftcanada.com/search.php?searchid=151443
did u try these yet?

fishe · January 3rd, 2007, 22:03

i have the exact same problem. i heard from someone that the shiny silver barrel on the inside ejection port may be dented if you loaded the mag without cocking the gun first.

Greylocks · January 3rd, 2007, 23:08

You resurrected a thread from 2005 to say this? As your first post?

Read some more, and complete your profile while you are at it. Start with the FAQ section and the Newbie Guide. It will help you a lot.

Evans Carter · November 22nd, 2010, 08:40

I have the exact same problem. Then I'll check inside the gun. There was something jammed so I clean and then everything is alright.
my lead system pro

Styrak · November 27th, 2010, 02:51

January.
3rd.
2007.

pusangani · November 27th, 2010, 03:01

Quote:

Originally Posted by Greylocks

You resurrected a thread from 2005 to say this? As your first post?

Read some more, and complete your profile while you are at it. Start with the FAQ section and the Newbie Guide. It will help you a lot.

Quote:

Originally Posted by Evans Carter

I have the exact same problem. Then I'll check inside the gun. There was something jammed so I clean and then everything is alright.

You resurrected a thread from 2007 to say this? As your first post?

hehehhehehehe

The circle of life on ASC

Amos · November 27th, 2010, 04:39

In a way... Pus sorta is like Greylocks...

your-pastor · January 19th, 2012, 00:17

if it's the ns2 one i had the same problem. mine was caused because the loading part of the nozzle was worn/broken down and catching the bb between where the loader hits the bb and the bottom of the circular opening of the air nozzle (keep in mind this is all one part).

I fixed it by filing down the nozzle into a straight line so that the bb wouldn't catch, and it works perfectly now.
I didn't have to take off much surface area either, just enough that I could run a bb along the bottom of the nozzle to the middle where it should sit nicely on the opening of the nozzle before getting into the hop chamber.

I could have bought a new nozzle, but i got the gun from a friend for 20 bucks and didn't give a damn.

*EDIT*
whoops, my bad.

JonsM4 · January 19th, 2012, 00:25

January.
3rd.
2007.

Freeze · January 19th, 2012, 07:25

This thread seems to be resurrected every two years or so.....

Drunk_Albertan · January 19th, 2012, 15:12

because Mac 11's are STILL problem childs by the look of things.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

October 6th, 2005, 19:44	#1
Radec Trader rating Join Date: Oct 2005 Location: UK	KWA Mac11a1 problems Hi, i recently bought a kwa m11a1 and it worked perfectly for a few days and then started to mess up. When i fire a shot either on semi or full auto, the chamber cover and bolt wont return to the cocked position, it keeps trying to cock itself until it runs out of gas. My only thoughts on why this would happen are: 1.Over-lubricated? 2.Gas (Abbey 134a) no longer powerful enough (unlikely as only had for a few days) 3.Something sticking in the mechanism, creating more friction, stopping it cocking. These are only guesses however as i am no expert, thts why i came to u guys. Any help appreciated thnks.

October 20th, 2005, 01:16	#2
krazie Sj Trader rating Join Date: Apr 2003 Location: CowTown	Check inside the gun and see if you have a BB jammed in beside the Gas port. __________________ Some people call them Terrorists. These boys have simply been...misguided.

November 22nd, 2010, 08:40	#6
Evans Carter Trader rating Join Date: Nov 2010	I have the exact same problem. Then I'll check inside the gun. There was something jammed so I clean and then everything is alright. my lead system pro Last edited by Evans Carter; November 27th, 2010 at 07:10..

October 20th, 2005, 02:58	#3
nutboi Trader rating Join Date: Apr 2005 Location: richmond bc	use search first and u'll get these http://www.airsoftcanada.com/search.php?searchid=151443 did u try these yet?

January 3rd, 2007, 22:03	#4
fishe Trader rating Join Date: Jan 2007	i have the exact same problem. i heard from someone that the shiny silver barrel on the inside ejection port may be dented if you loaded the mag without cocking the gun first.

January 3rd, 2007, 23:08	#5
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	You resurrected a thread from 2005 to say this? As your first post? Read some more, and complete your profile while you are at it. Start with the FAQ section and the Newbie Guide. It will help you a lot.

November 27th, 2010, 02:51	#7
Styrak Trader rating Join Date: Jan 2007 Location: Saskatoon, SK	January. 3rd. 2007. __________________ Airsoft Sales and Repair/Upgrade Services

November 27th, 2010, 04:39	#9
Amos Trader rating Join Date: Aug 2006 Location: Japan	In a way... Pus sorta is like Greylocks... __________________ Custom Builds: FA3674U Krinkov G3SD6

January 19th, 2012, 00:17	#10
your-pastor Trader rating Join Date: Sep 2007 Location: canada, bc, langley	if it's the ns2 one i had the same problem. mine was caused because the loading part of the nozzle was worn/broken down and catching the bb between where the loader hits the bb and the bottom of the circular opening of the air nozzle (keep in mind this is all one part). I fixed it by filing down the nozzle into a straight line so that the bb wouldn't catch, and it works perfectly now. I didn't have to take off much surface area either, just enough that I could run a bb along the bottom of the nozzle to the middle where it should sit nicely on the opening of the nozzle before getting into the hop chamber. I could have bought a new nozzle, but i got the gun from a friend for 20 bucks and didn't give a damn. EDIT whoops, my bad. __________________ EMT is king, Paypal if i have to +4% Last edited by your-pastor; January 19th, 2012 at 01:28..

January 19th, 2012, 00:25	#11
JonsM4 Trader rating Join Date: Aug 2009 Location: What's my 20?	January. 3rd. 2007. __________________ King Arms M4A1 Colt : ICS M4 C-15 : KJW G23

January 19th, 2012, 07:25	#12
Freeze Trader rating Join Date: Feb 2011 Location: Mississauga	This thread seems to be resurrected every two years or so..... __________________ VFC HK416C Crushed Orchid - VFC SR16 BCM ZTW TM G17 Loki Tactical Pink - TM G19 TTI Combat Master

January 19th, 2012, 15:12	#13
Drunk_Albertan Trader rating Join Date: Aug 2006 Location: Calgary, Ab	because Mac 11's are STILL problem childs by the look of things. __________________ Age Verifier for Calgary, PM me.

KWA Mac11a1 problems

Gas Gun Solutions