Kraken Aftermath AK-47 issue

kamil0321 · July 27th, 2011, 22:00

Hi ,
A bad thing happened to my Kraken Aftermath AEG, the stock broke and I need advice on how to fix it. If there is not a way , do you know where I could find a new body (lower receiver) for my Kraken , and If it is possible , as cheap as we can go because my budget is really tight at the moment.

Thanks!
-Kamil S.

PICTURES:
http://tinypic.com/r/1z23p83/7
http://tinypic.com/r/2cfs6td/7
http://tinypic.com/r/28rz3wm/7
http://tinypic.com/r/2v9yh6o/7
http://tinypic.com/r/33w5her/7

Kingsix · July 27th, 2011, 22:17

Get Age verified on ASC and a retailer may be able to get you a new metal lower receiver however they usually run from 100-200$. Or you may be able to buy a used plastic receiver from someone on the classifieds.

DEATH2000 · July 27th, 2011, 22:33

If your budget is really tight right now your out of luck. A new lower reciever will probably be more expensive then replacing the whole gun. Which with the Kraken AK is probably a better idea.

Infantryman · July 27th, 2011, 22:42

Ouch. I would say a lot of putty. something that is going to hold those two together really well...Then once its settled, wrap it up with a little bit of duct tape. This is just a quick fix of course. It won't look nice cosmetically. But, if all you care about is getting it back up in your shoulder, try it out.

I have one where the receiver cracked in half on one side. Did what I recommended with it, and it holds up really well. I don't care how it looks. Mostly cause it's just a loaner, and - it's a Kraken for christs sake - I still like them.

kamil0321 · July 27th, 2011, 22:54

Quote:

Originally Posted by Infantryman

Ouch. I would say a lot of putty. something that is going to hold those two together really well...Then once its settled, wrap it up with a little bit of duct tape. This is just a quick fix of course. It won't look nice cosmetically. But, if all you care about is getting it back up in your shoulder, try it out.

I have one where the receiver cracked in half on one side. Did what I recommended with it, and it holds up really well. I don't care how it looks. Mostly cause it's just a loaner, and - it's a Kraken for christs sake - I still like them.

What kind of putty? The way you're telling me this sounds promising , I really dont care about it cosmetically , I just want to play some airsoft

kamil0321 · July 27th, 2011, 22:59

Mighty Putty?

Mortified Penguin · August 2nd, 2011, 21:01

If I were in your situation I'd throw a bit of tape over the hole on the end to keep dirt out, tape the battery to the side of the gun like a ghetto PEQ and use it like that. It would be somewhat badass.

Infantryman · August 2nd, 2011, 22:03

Umm, I don't remember what the name of it was. It was some sort of industrial goo, or soemthing. Read the label to make sure its okay with plastics. Wouldn't want your receiver to melt on ya.

Armen000 · August 2nd, 2011, 22:13

$50 cheap enough? hope this helps buddy, i have the G&P body on my kraken but i recommend you get this one. Full metal body from King arms....

http://www.redwolfairsoft.com/redwol...l?prodID=21914

Hope this helps dude...

Styrak · August 2nd, 2011, 22:23

Quote:

Originally Posted by Armen000

$50 cheap enough? hope this helps buddy, i have the G&P body on my kraken but i recommend you get this one. Full metal body from King arms....

http://www.redwolfairsoft.com/redwol...l?prodID=21914

Hope this helps dude...

Except he can't order that, it'll get seized at the border.

MultipleParadox · August 2nd, 2011, 22:33

Quote:

Originally Posted by Styrak

Except he can't order that, it'll get seized at the border.

Yup part is prohibited from import
Dude, before posting wrong information that can cost money to members, for nothing, maybe you should read the Faqs once more... ?

Armen000 · August 2nd, 2011, 22:42

It was just a suggestion, on which one to get, im sure he can find a Canadian retailer who can either order one for him or have one in stock....

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 27th, 2011, 22:00	#1
kamil0321 Trader rating Join Date: Mar 2011 Location: Montreal , Quebec	Kraken Aftermath AK-47 issue Hi , A bad thing happened to my Kraken Aftermath AEG, the stock broke and I need advice on how to fix it. If there is not a way , do you know where I could find a new body (lower receiver) for my Kraken , and If it is possible , as cheap as we can go because my budget is really tight at the moment. Thanks! -Kamil S. PICTURES: http://tinypic.com/r/1z23p83/7 http://tinypic.com/r/2cfs6td/7 http://tinypic.com/r/28rz3wm/7 http://tinypic.com/r/2v9yh6o/7 http://tinypic.com/r/33w5her/7

July 27th, 2011, 22:17	#2
Kingsix Trader rating Join Date: Apr 2008 Location: Peoples Republic of Toronto	Get Age verified on ASC and a retailer may be able to get you a new metal lower receiver however they usually run from 100-200$. Or you may be able to buy a used plastic receiver from someone on the classifieds. __________________

July 27th, 2011, 22:33	#3
DEATH2000 Trader rating Join Date: Mar 2006 Location: Calgary, Alberta	If your budget is really tight right now your out of luck. A new lower reciever will probably be more expensive then replacing the whole gun. Which with the Kraken AK is probably a better idea. __________________

July 27th, 2011, 22:42	#4
Infantryman Trader rating Join Date: Feb 2002 Location: Petawawa	Ouch. I would say a lot of putty. something that is going to hold those two together really well...Then once its settled, wrap it up with a little bit of duct tape. This is just a quick fix of course. It won't look nice cosmetically. But, if all you care about is getting it back up in your shoulder, try it out. I have one where the receiver cracked in half on one side. Did what I recommended with it, and it holds up really well. I don't care how it looks. Mostly cause it's just a loaner, and - it's a Kraken for christs sake - I still like them. __________________ Infantryman, AKA: Chief

July 27th, 2011, 22:59	#6
kamil0321 Trader rating Join Date: Mar 2011 Location: Montreal , Quebec	Mighty Putty?

August 2nd, 2011, 21:01	#7
Mortified Penguin Trader rating Join Date: Nov 2010 Location: Prince George, BC	If I were in your situation I'd throw a bit of tape over the hole on the end to keep dirt out, tape the battery to the side of the gun like a ghetto PEQ and use it like that. It would be somewhat badass. __________________

August 2nd, 2011, 22:03	#8
Infantryman Trader rating Join Date: Feb 2002 Location: Petawawa	Umm, I don't remember what the name of it was. It was some sort of industrial goo, or soemthing. Read the label to make sure its okay with plastics. Wouldn't want your receiver to melt on ya. __________________ Infantryman, AKA: Chief

August 2nd, 2011, 22:13	#9
Armen000 Trader rating Join Date: Dec 2008	$50 cheap enough? hope this helps buddy, i have the G&P body on my kraken but i recommend you get this one. Full metal body from King arms.... http://www.redwolfairsoft.com/redwol...l?prodID=21914 Hope this helps dude...

August 2nd, 2011, 22:42	#12
Armen000 Trader rating Join Date: Dec 2008	It was just a suggestion, on which one to get, im sure he can find a Canadian retailer who can either order one for him or have one in stock....

Kraken Aftermath AK-47 issue

Doctor's Corner