|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 30th, 2011, 19:57
|
#1 |
|
Full auto doesn't work anymore
Hi guys,
I'm not very good with aeg problems but here's mine, when i turn the selector switch to single shot, everything works fine, when its full auto turn, it still fire single shot.. I have a ASCU (airsoft smart control unit) in my gun. Can you guys try to help me, i would like to do it by myself so i can learn more about AEG. thank you |
|
|
|
July 1st, 2011, 02:34
|
#2 |
|
Well if it wasnt for the Mosfet, Id have figured the Selector plate on the side of the mechbox has broken at the hump.
basically when you more it from safe to semi it moves enough for the System to fire but when you switch to full auto, it doesnt move far enough to move the semi lock out of the way. Happened on my m733.
__________________
A single Light is all one needs to find their way through the darkness, But a single BB is all you need to bring it on! ========== Im not worried about the Bullet that has my Name on it, Im worried about the bullet that says "to whom it may concern" Lt. Alexander Washington -(Red Tails 1944) Ret. |
|
|
|
|
July 1st, 2011, 12:44
|
#3 |
|
Most likely the third connector (the longer one) attached to the switch on the outside of the mechbox doesn't make contact anymore, check that out first !
|
|
|
|
|
 |
|
||||||
| Bookmarks |
|
|
 |
|
