|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
June 16th, 2011, 01:27 | #1 |
Unknown jam, and the revsolves
TSD/SRC gun jam what it looks like.
Upon doing some last minute dial in with my red dot on a TSD/SRC M4A1 I heard a click then upon next trigger pull the "whirl of death" ... oh crap The Bits are the gear hope you can see this in the pics Lesson learned "stay with high quaity BB's" |
|
June 16th, 2011, 01:42 | #2 |
BB's would not cause this.
|
|
June 16th, 2011, 01:50 | #3 |
Oh they did there was 3 jammed in the barrel... Upon the tear down I found out
|
|
June 16th, 2011, 02:13 | #4 |
Still, that would not be the cause of your gears stripping. That's just not how it works, not possible.
Also, is the bottom axle on your bevel (motor-contacting) gear missing/broken? It looks like it. That could be the cause of your stripped gears Last edited by Styrak; June 16th, 2011 at 02:15.. |
|
June 16th, 2011, 03:12 | #5 | |
yeah .. the clink was the bevel gear shaft letting go and going cock eyed, and then the carnage in your picture.
__________________
Vancouver Island Gun Doc, custom builder. Leader - M.E.R.C. multi enviroment recon CAVALRY Quote:
|
||
June 16th, 2011, 19:01 | #6 |
All shafts were intact, none broken
The gearbox was never taken apart before, also the piston is striped as well. Just a bad box from the factory I'm thinking .... |
|
|
Bookmarks |
|
|