PDI HOP UP problem APS Type 96

sebdark · May 19th, 2011, 23:15

Hi!

There are my gun...
Maruzen APS Type 96
PDI Cylinder Set VC
PDI 6.01 Inner Barrel
PDI Hop-up Chamber
PDI Barrel Spacer Set x2
PSS96 Zero Trigger
Spring M130 if I remenber
Firefly Bucking
I use (at the moment) 0.30g Madbull Precision BB

The problem I have is the screw (of the hop up adjustment) is tighted to max and the BB still to reach the sky after 30m. That made me unable to hit a target at 50m (150 feet). :banghead:

I heard I am supose to be able to hit a target of about 1 feet square at 50m with a sniper full upgraded like this one...

Help me! What should I change or adjust?
Edit: The left/right adjustement is fine it go in straight line its just the "sky" adjustment the problem...

Other point the Inner Barrel is REALLY hard to remove or put back in the outter barrel (friction) any way to made it easier?

sebdark · May 26th, 2011, 01:02

Bump I still need help

I will downgrade (again) my spring is firing at 494 fps :'( it will help the hop up.
Did I should change the bucking? What is the best bucking for my setup?

voorhees -FWA- · May 26th, 2011, 01:47

Firefly hop up rubbers are very picky about FPS ranges, soft, medium, and hard... and I believe the max range for the hard Firefly rubber is 500FPS... switch to another rubber to see if you improve your range, it can't hurt.

sebdark · May 26th, 2011, 01:50

I have to find out the good spring to downgrade the FPS to 420-430 (less than 450) with 0.20. Firefly Rubbers are supose to be good?

voorhees -FWA- · May 26th, 2011, 01:52

Yes... i bought a few from Amos last year and I've ran them all in the 350FPS range. I'm starting to get in to the sniper platform as soon as my M28 gets here.

Do you know what you have for rubbers? Soft, medium, or hard?

sebdark · May 26th, 2011, 01:55

I dont know I believe it's a hard one but He could be a litle bit destroy... The previous owner was shooting at 530+ fps with this gun + hop up. I will look for another hard firefly.

voorhees -FWA- · May 26th, 2011, 01:57

Contact Amos on these forums, he should be able to help you out.

sebdark · May 26th, 2011, 01:57

Okay thank!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 19th, 2011, 23:15	#1
sebdark Trader rating Join Date: Feb 2009 Location: Baie-Comeau prov. of QC	PDI HOP UP problem APS Type 96 Hi! There are my gun... Maruzen APS Type 96 PDI Cylinder Set VC PDI 6.01 Inner Barrel PDI Hop-up Chamber PDI Barrel Spacer Set x2 PSS96 Zero Trigger Spring M130 if I remenber Firefly Bucking I use (at the moment) 0.30g Madbull Precision BB The problem I have is the screw (of the hop up adjustment) is tighted to max and the BB still to reach the sky after 30m. That made me unable to hit a target at 50m (150 feet). :banghead: I heard I am supose to be able to hit a target of about 1 feet square at 50m with a sniper full upgraded like this one... Help me! What should I change or adjust? Edit: The left/right adjustement is fine it go in straight line its just the "sky" adjustment the problem... Other point the Inner Barrel is REALLY hard to remove or put back in the outter barrel (friction) any way to made it easier? __________________ Escadron Fantôme de la Mort qui Tue avec du Feu pis des Explosions Last edited by sebdark; May 19th, 2011 at 23:16.. Reason: Un petit oublie

May 26th, 2011, 01:02	#2
sebdark Trader rating Join Date: Feb 2009 Location: Baie-Comeau prov. of QC	Bump I still need help I will downgrade (again) my spring is firing at 494 fps :'( it will help the hop up. Did I should change the bucking? What is the best bucking for my setup? __________________ Escadron Fantôme de la Mort qui Tue avec du Feu pis des Explosions

May 26th, 2011, 01:50	#4
sebdark Trader rating Join Date: Feb 2009 Location: Baie-Comeau prov. of QC	I have to find out the good spring to downgrade the FPS to 420-430 (less than 450) with 0.20. Firefly Rubbers are supose to be good? __________________ Escadron Fantôme de la Mort qui Tue avec du Feu pis des Explosions

May 26th, 2011, 01:47	#3
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	Firefly hop up rubbers are very picky about FPS ranges, soft, medium, and hard... and I believe the max range for the hard Firefly rubber is 500FPS... switch to another rubber to see if you improve your range, it can't hurt.

May 26th, 2011, 01:52	#5
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	Yes... i bought a few from Amos last year and I've ran them all in the 350FPS range. I'm starting to get in to the sniper platform as soon as my M28 gets here. Do you know what you have for rubbers? Soft, medium, or hard?

May 26th, 2011, 01:55	#6
sebdark Trader rating Join Date: Feb 2009 Location: Baie-Comeau prov. of QC	I dont know I believe it's a hard one but He could be a litle bit destroy... The previous owner was shooting at 530+ fps with this gun + hop up. I will look for another hard firefly. __________________ Escadron Fantôme de la Mort qui Tue avec du Feu pis des Explosions

May 26th, 2011, 01:57	#7
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	Contact Amos on these forums, he should be able to help you out.

May 26th, 2011, 01:57	#8
sebdark Trader rating Join Date: Feb 2009 Location: Baie-Comeau prov. of QC	Okay thank! __________________ Escadron Fantôme de la Mort qui Tue avec du Feu pis des Explosions

PDI HOP UP problem APS Type 96

Doctor's Corner