|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 15th, 2011, 22:06 | #1 |
Jing Gong G36C Air Nozzle
So I've searched google and the threads here and what I've concluded is that JG has a tendency to put AK air nozzles in their guns for some reason. Just wondering if that is the right conclusion.
Another question I had before I have to take that damn gearbox apart again is where should my air nozzle have to be sitting in relation to my hop up If you need me to post pics of how it is sitting right now let me know. Thanks. |
|
January 15th, 2011, 22:47 | #2 |
I put a Aug on the one I had the Ak was to small
__________________
T.W.A.T Ceaser's Ghost |
|
January 15th, 2011, 23:18 | #3 |
January 16th, 2011, 01:11 | #4 |
The AK ones are a shave smaller just enough for it not to make a proper seal, an AUG one fits perfectly on the G36 though.
|
|
January 16th, 2011, 07:12 | #5 |
These guys are correct canadauni. Do so research on the this issue and you willl find lots of info on the tollerances of the JG G36.
** A TM (or Modify) AUG nozzel is the closest fit you will find to a JG G36 nozzel. SHA DO
__________________
|
|
January 16th, 2011, 13:08 | #6 |
Just had to make sure because when i looked it up on google I saw a lot on people using AK nozzles. Thanks for the help.
Now to my second question that I posted earlier, I'm having a slight feeding problem after doing a cylinder, cylinder head, piston, piston head upgrade. It may be because a misalignment in the gears or something to do with my tappet plate. Any help is appreciated. |
|
|
Bookmarks |
|
|