|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
August 17th, 2009, 01:09 | #1 |
Upgraded gearbox= upgraded motor?
I am upgrading my gearbox, i have a 9.6 v nun chuck battery 1400mah and a stock motor. Now if i upgrade my gearbox, it'll shoot aprox 50fps more than stock should i buy a high torque motor?
|
|
August 17th, 2009, 01:10 | #2 |
im pretty sure upgrading your motor wont increase your fps.. seeing as that is what springs and better compression are for....
|
|
August 17th, 2009, 01:14 | #3 | |
Quote:
Thanks in advance |
||
August 17th, 2009, 01:16 | #4 |
vision impaired
|
It SHOULD still work but there will obviously be a decrease in ROF
|
August 17th, 2009, 01:19 | #5 |
my bad, i could have sworn it said motor where it now says gearbox.
|
|
August 17th, 2009, 01:26 | #6 |
August 17th, 2009, 01:28 | #7 |
lol that would do it.
also what fps will your gun be shooting when it is upgraded because you said it is going up 50 but you didnt state what it will be firing at when all is done |
|
August 17th, 2009, 01:31 | #8 |
August 17th, 2009, 01:31 | #9 |
Roughly 400 fps with .20's but i'd be using .25 so i'm guessing mmmm 360 ish i'm not too sure
|
|
August 17th, 2009, 10:21 | #10 |
High mah will only make your gun shoot low rpm for a longer time. To get high ROF you'd need higher voltage like 10.8 or lipo 11.1 but you run the risk of overworking and frying your motor. Short answer... upgrade your motor as well. 400 fps is typically an M120 so you need nigh torque. Stock motor will work, but it'll be like towing a trailer with a Neon.
|
|
August 18th, 2009, 21:32 | #11 |
thanks
|
|
|
Bookmarks |
|
|