Airsoft Canada
MILSIG

Go Back   Airsoft Canada > Discussion > Upgrades & Modifications
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KSC G19 upgrade

:

Upgrades & Modifications

Reply
 
Thread Tools
Old June 3rd, 2005, 18:03   #16
YourPusher
 
Join Date: Sep 2003
Wait. So I need to know whether I can order from DEN and whether it will not get seizzed by customs....

Dammit! Why does no one in Canada carry this item?!?!?!!? :smack: :kill: :kill:
YourPusher is offline   Reply With Quote
Old June 4th, 2005, 14:34   #17
ILLusion
GBB Whisperer
 
ILLusion's Avatar
 
Join Date: Jun 2002
Location: Toronto
we can say that customs will seize it - but you'll get lucky and it goes through.
we can also say that customs will not seize it - but the shipment happens to go to a tightass customs officer who decides to seize it.

In the end, the customs officer is God as far as your shipiment is concerned. Once it's seized, there isn't too much you can do to recover it.

Your call.
ILLusion is offline   Reply With Quote
Old February 10th, 2006, 21:14   #18
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Reserecting this thread just because I bought a G&G Threaded Barrel for my KSC G19 with metal slide and the works for upgrades. Anyways, It cycles funny when pulling on the slide, but when I shoot it the slide jams full forward and empties the mag of gas. I read that filling is in order, but where exactly? Top, one of the angled parts on the bottom.................. Working on this for a couple hours tonight trying to figure out where it's screwing up, but I don't want to file every single surface on it to find out it's screwed for good.

Thanks.
CDN_Stalker is offline   Reply With Quote
Old April 12th, 2006, 11:16   #19
bronney
 
Join Date: Feb 2005
Location: Hong Kong
Send a message via ICQ to bronney
I just had this experience and got it sorted out:

1. You need to use a smaller o-ring (I got mine from a WA valve) for the inner tip so it fits in the G&G barrel.

2. Then file the corner of the front of the chamber in a slight angle like in the pic.

It'll work perfect after that
Attached Images
File Type: jpg P1020179.jpg (52.3 KB, 53 views)
File Type: jpg P1020180.jpg (48.8 KB, 54 views)
__________________
bronney is offline   Reply With Quote
Old April 12th, 2006, 11:38   #20
CDN_Stalker
Official ASC Bladesmith
 
CDN_Stalker's Avatar
 
Join Date: Jul 2003
Location: Ottawa, Ont.
Send a message via MSN to CDN_Stalker
Quote:
Originally Posted by bronney
I just had this experience and got it sorted out:

1. You need to use a smaller o-ring (I got mine from a WA valve) for the inner tip so it fits in the G&G barrel.

2. Then file the corner of the front of the chamber in a slight angle like in the pic.

It'll work perfect after that
No O-ring in mine, and filing it down on the top to a better angle didn't do anything. It works in my plastic slide G19, but no matter how light a thing I put on the end of the barrel, it locks up tight. Put a featherweight chrony sensor on to chrony it, slide locks up. Oh well, at least the threaded barrel looks kinda cool.
CDN_Stalker is offline   Reply With Quote
Old April 13th, 2006, 03:11   #21
bronney
 
Join Date: Feb 2005
Location: Hong Kong
Send a message via ICQ to bronney
The metal slide I am using is the cheapo white trade one. What metal slide do you have? And do you see where I file? The corner of the front chamber only, on both sides. I get this idea from comparing my metal outer that came with my metal slide, that barrel had the angle so I did it and wham it worked.

If you don't have an o-ring I strongly recommend you get one, the inner barrel is supposed to have an o-ring wrapped like mine for stablizing shots and also puts the back hook of the inner assembly at a good angle to engage the frame. Which could also be your lock up problem. I know exactly how you feel, took me 2 weeks to figure it out.

Now try this, when you gun locks up with silencer attached, turn the gun up side down, and cock it. It works right? Now if this works it either means the hooks on the outer isn't engaging the frame right, or the front chamber's sharp corner (GNG's sharp) is catching the chamber space on the slide. That's why the file.
__________________
bronney is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Upgrades & Modifications

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
MILSIG

All times are GMT -4. The time now is 00:03.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.