Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

GBBR Maintenance guide

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old December 16th, 2017, 15:26   #1
Twin#1[Op-for]
 
Twin#1[Op-for]'s Avatar
 
Join Date: Sep 2009
Location: Langley BC
GBBR Maintenance guide

Hey all, Ive tried searching for a guide on here on maintaning and cleaning/ oiling GBBRs, specifically WE M4s, but can't find anything. Is there one on here or should I dive into youtube and try to find a reliable guide?
Twin#1[Op-for] is offline   Reply With Quote
Old December 16th, 2017, 21:43   #2
FrostyFlakes02
 
FrostyFlakes02's Avatar
 
Join Date: May 2016
Location: Montreal, Quebec
generally anything that is a surface of contact for moving parts, anything that acts as a seal for gas, has to be lubed. You can pretty much see the wearing on the parts of your gun by opening it up. Don't forget to maintain your mags as well, which is the same process but you're unlikely going to open up your gun unless there's debris stuck in it. I usually empty the gas, one drop on the output valve, give it a little "massage", one drop on the fill valve and fill the mag just a little bit to put pressure inside the mag.

Here's a good guide: https://www.youtube.com/watch?v=KYGqq0d7yzM
FrostyFlakes02 is offline   Reply With Quote
Old December 17th, 2017, 02:03   #3
Danke
 
Danke's Avatar
 
Join Date: Oct 2007
Location: Danger Zone
Read the mega thread on here. Lots of info there.

They like to run wet, so heavy silicon oil in the trigger pack, silicon grease or similar for the bolt and buffer and regular light silicon oil in the mags.
__________________
Airsoft, where nothing is hurt but feelings.
Danke is offline   Reply With Quote
Old December 17th, 2017, 15:02   #4
Katipunero
 
Katipunero's Avatar
 
Join Date: Nov 2016
Location: Toronto
Quote:
Originally Posted by Twin#1[Op-for] View Post
Hey all, Ive tried searching for a guide on here on maintaning and cleaning/ oiling GBBRs, specifically WE M4s, but can't find anything. Is there one on here or should I dive into youtube and try to find a reliable guide?
Generally, I use grease on 11, 1, 5 and 7 o'clock positions on the bolt carrier.

Grease on charging handle 12, 9 and 3 o'clock positions.

FCG will get light oiling, only when necessary.

One place people neglect in the buffer tube. Most of the problems people have with aftermarket bolt carriers getting stuck half charged is because the rear of the bolt carrier on the 12 o'clock position is dry. A little grease here helps significantly.

Other than that, inner barrel and hop up bucking dry and clean.
Katipunero is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 03:31.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.