Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

WE Mags low on gas, and not filling

:

Doctor's Corner

Reply
 
Thread Tools
Old June 30th, 2017, 01:37   #1
Slodin
 
Slodin's Avatar
 
Join Date: Apr 2014
Location: Surrey B.C
WE Mags low on gas, and not filling

Hi,

After fixing my WE M4 with some new hopup, rubber and inner barrel, I'm having trouble with my mags. I should mention that I had other WE GBBRs before, and I think I know how to fill them cause I got 2-3 mags worth of bbs out of one gas fill.

I bought 4 new mags a while ago (about 4-5 month), and filled them with some silicone propane and left it stored away. I have tried them when they first arrived, and it shot fine. I don't have a lot of space so I only shot 3-5 shots per mag to see if they are good.

I took them to the field the other day (on 2 occasions), first time it was kinda cool, about 15-18 degree out and all my mags only fires 3-5 rounds and it will run out of gas. it doesn't matter how long I try to fill them, they won't fire more than 3-5 shot. (still weird, even my WE pistol mags can still fire 1 and a half mags before running out, it's not really cold outside)

second time to the field I got 3 mags shooting a bit more than half a mag before running out of gas. The 4th mag won't take any gas at all, it doesn't vent, nor make a sound, it just flat out don't fill at all. It was around 25 degrees outside.

What could be the problem? I don't hear any sound, and that mag just won't fill no matter what...

Thanks...:smack:
__________________
Slodin is offline   Reply With Quote
Old June 30th, 2017, 15:48   #2
Katipunero
 
Katipunero's Avatar
 
Join Date: Nov 2016
Location: Toronto
Is your propane/green gas can full? If it's running low the pressure between your mag and the tank will be at equilibrium, so eventually no propane gets transferred into your mag. Try a new tank.
Katipunero is offline   Reply With Quote
Old July 1st, 2017, 10:12   #3
Thenooblord
Can't fix my own guns. Willing to fix yours.
 
Thenooblord's Avatar
 
Join Date: Jan 2009
Location: Sherwood Forest
Send a message via MSN to Thenooblord
First, especially if you have a metal propane adapter, check the tip for the tiniest ding or dent, a very small dent can prevent a metal tip from getting ito the valve properly

secondly, all non venting mags (mags that dont hiss out hte valve when you fill them) are very temperature sensitive to fill, if your propane tank is not warmer than your mag there will only br gravity pulling down, against the HIGHER pressure in the mag caused by the higher temperature, try putting the mags in the fridge for a few minutes so cool the metal and the propane should flow more happily


kinda off topic from here but also, as a PSA, ppl advertise and sell these "silent fill Orings" for mags that eliminate the venting action that works to cool the magazine and let it fill properly, these are straight up detrimental to performance of the mags in this specific way, and IMO a total scam
thought process of the silent fill ppl:
"TM mags, vent, and work every time all the time,
WE mags and KJW mags are a pain to fill sometimes and unreliable
yea lets make our TM mags more like those mags, were the smartest!"
__________________

Words to live by
Quote:
Originally Posted by Kid View Post
The apartment I am in right now costs $100 a month.
My average spending on food per day is less than $4.
My airsoft spending in the last month and a half has totaled over $1400.
They're called priorities. Get yourself some.
Thenooblord is offline   Reply With Quote
Old July 2nd, 2017, 03:51   #4
Slodin
 
Slodin's Avatar
 
Join Date: Apr 2014
Location: Surrey B.C
my green gas can is a near fresh can (filled about 4-5 of WE Glock 25rd mags).

The temp of both the mag and can should be the same, they have been in the same bag for at least 1-2 hours before I got to the field...

The adapter is plastic, its the AI adapter cause people said the metal ones are not as great so I bought the plastic one...

It's weird cause the mag that came with the PDW (the 5th one, but it's old), is fine, it can fill to give me 2 mags of pew pew...it's only the new ones I got are being a pain in the ass...
__________________
Slodin is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 14:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.