Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KWA MP7 - Outdoor skirmishable as primary?

:

Airsoft Guns Discussion

Reply
 
Thread Tools
Old March 18th, 2013, 17:43   #61
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
I take it off and use paint stripper. It's metal if IIRC. Nothing else has worked (fast enough) for me.

If you get an Angry Gun suppressor it'll come with a really nice fitting flashhider...so just unscrew the old one and screw on the new one.

So far as the stock goes...take a look at how the notches are...just copy them and file in another set where you want them. It's that simple....and there's a Youtube vid of it somewhere too.

If your break the front tab off the end cap you can just glue the cap back on permanently...mine was broken and I modded it with a lower M4 RIS...but because of the damage I had to glue on the end cap. Doesn't affect anything and all the innards come out from the back anyways.


Last edited by m102404; March 18th, 2013 at 17:46..
m102404 is offline   Reply With Quote
Old March 18th, 2013, 17:46   #62
lurkingknight
"bb bukakke" KING!
 
Join Date: Jul 2011
Location: Ottawa
the flash hider on the mp7 is metal.

And to complicate things, it's got some glue on the threads, so if you take it off, you have to either heat it or get a good enough grip on it to torque it off. Not a good idea if you're going to reuse it.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know.
lurkingknight is offline   Reply With Quote
Old March 18th, 2013, 17:53   #63
K3vX
 
K3vX's Avatar
 
Join Date: May 2012
Location: Quebec City
Well, if it's metal, no need to be gentle like I said. And to remove it, yes, heat is the best way. Two ways to heat are a heat gun, or if you're poor like me, suspending the glued part in really hot water can do the job. I did it once, when I did not have a heat gun. It works, but be careful.
K3vX is offline   Reply With Quote
Old March 18th, 2013, 18:15   #64
Oshiha
 
Oshiha's Avatar
 
Join Date: Jun 2012
Location: Edmonton, Alberta
Even if its metal, you should still be gentle.
I suspended my flashhider in hot water for a good 15 mins (3 refills of hot boiling water), and flamed it with a cigarette torch lighter . Still would not budge, so I took a clamp and turned it.. resulting in getting a scratched/deformed flash hider.
Good thing the supressor I bought includes a flash hider

Edit: And a note, when you take the flash hider off, take off the excess glue off the outer barrel while you can.
__________________
Team VG93
AEG : Custom G&P VLTOR M4
Magpul Masada ACR

Bolt action: Tokyo Marui VSR-10 GSPEC
Oshiha is offline   Reply With Quote
Old March 18th, 2013, 18:33   #65
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
Use a propane torch.
m102404 is offline   Reply With Quote
Old March 18th, 2013, 23:45   #66
Cornf1ake
 
Join Date: Jan 2013
Location: Guelph
I plan on getting an angry gun suppressor and I think that does indeed come with a new hinder.

Do I really have to take the sights, top rail and front cover off to remove that thing?
Cornf1ake is offline   Reply With Quote
Old March 19th, 2013, 00:41   #67
Danke
 
Danke's Avatar
 
Join Date: Oct 2007
Location: Danger Zone
1) Remove flash hider with box wrench.
2) Flash hider comes off all on it's own. No other parts need to be removed.
__________________
Airsoft, where nothing is hurt but feelings.
Danke is offline   Reply With Quote
Old March 28th, 2013, 08:39   #68
Cornf1ake
 
Join Date: Jan 2013
Location: Guelph
This thing is amazing... Will I need to do anything to it to play at flag raiders? Or would duster gas get it by?
Cornf1ake is offline   Reply With Quote
Old March 28th, 2013, 09:57   #69
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
You'd better chrony it with/without suppressor...and, because of the nature of gas pistols/rifles, you'll want to account that for heavier ammo you need to be shooting lower velocities so you end up shooting the same power level (in Joules) as a gun shooting with 0.20's at whatever velocity limit there is. With gas guns you'll sometimes find a gun that shoots 400fps w/0.20's...and it shoots at/nearly-at 400fps when you use heavier BB's.

Chrony with greengas/propane...and with duster if that's what you're going to use.

With 0.30's we had some setups shooting 450fps...which is WAY too hot for most uses.
m102404 is offline   Reply With Quote
Old May 15th, 2013, 17:59   #70
davedave
 
Join Date: Nov 2011
What's your guys's thoughts on the kwa mp9? does it perform similiar to the mp7 that i've heard great things about? I as well have the intent for outdoor play with it.
davedave is offline   Reply With Quote
Old May 15th, 2013, 22:46   #71
audi_bhoy
 
Join Date: Mar 2009
Location: Trois-Rivières
The sound of the MP9 is awesome, rate of fire too !! I have one and it's my backup, currently using it since my M4 is on the workbench Love it
audi_bhoy is offline   Reply With Quote
Old June 26th, 2013, 11:49   #72
K3vX
 
K3vX's Avatar
 
Join Date: May 2012
Location: Quebec City
I figured I'd post my question here:

Is there any particular reason everyone and their mothers are reselling their KWA Mp7? Even Stealth is selling a kit on the classifieds.

I was shopping for one, but this made me wondering..

I've no doubt it's a good gbb, but I swear half the Gaz Classifieds is filled with Mp7's...
K3vX is offline   Reply With Quote
Old June 26th, 2013, 11:52   #73
SINN
 
SINN's Avatar
 
Join Date: Jun 2005
Location: Toronto
Send a message via MSN to SINN
people get bored...that's about it. I know just as many people wanting to buy one as there are selling at the moment.
__________________
MODT - Magnus Operator Development Team - tu fui ego eris
SINN is offline   Reply With Quote
Old June 26th, 2013, 11:58   #74
K3vX
 
K3vX's Avatar
 
Join Date: May 2012
Location: Quebec City
Makes sense.
K3vX is offline   Reply With Quote
Old June 26th, 2013, 12:05   #75
SINN
 
SINN's Avatar
 
Join Date: Jun 2005
Location: Toronto
Send a message via MSN to SINN
like they said earlier in the thread, they are quite the little beast!
__________________
MODT - Magnus Operator Development Team - tu fui ego eris
SINN is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Airsoft Guns Discussion

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 04:24.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.