Airsoft Canada
www.jsairsoft.com

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

AEG always shooting up? [FIXED]

:

Doctor's Corner

Reply
 
Thread Tools
Old October 7th, 2012, 02:23   #1
Ayashifx55
 
Ayashifx55's Avatar
 
Join Date: Jan 2008
Location: Quebec, Montreal
AEG always shooting up? [FIXED]

Hello,

i really tried to search hard for this problem but i've got nothing. I tried to fix my aeg's bolt catch so i did a lot of assembling and reassembling (without touching the gearbox though) it was shooting straight before but now,it keeps shooting upward. Even if i try to adjust the hop-up, it doesnt do much , i'm not getting back my straight shots. What i mean by "Shooting up" is that right out of the inner barrel, it goes up instead of going straight, out of the barrel. For example, from 1 meter, if i try to aim something directly, it will just keep shooting over it. Only if i adjust to the max , it will start jamming / not be able to shoot bb's (but when it was working, the bb's will drip out of the barrel if i adjust the hop-up too downwards)

It shoots perfectly, no jams or anything, not straight at all though. Feeds fine.

What possible parts are involved in this most likely?

EDIT [FIXED] :
thank you very much everyone for your fast replies. It was actually a stupid thing.

At the end of the inner barrel , there was a plastic ring holding the barrel tight so it does not move. The barrel was aiming down therefore always shooting up. The problem was that the ring got stucked with the flash hider, i removed the flash hider and the ring dropped in.


Thank you very much for your time and patience.
The gun is a VFC SR635 with the clear hop-up chamber.
__________________
No guns.

Last edited by Ayashifx55; October 7th, 2012 at 11:56..
Ayashifx55 is offline   Reply With Quote
Old October 7th, 2012, 02:29   #2
JerryMcGoulBerry
 
JerryMcGoulBerry's Avatar
 
Join Date: May 2012
Location: Calgary Alberta
I've never heard of something like this. Try disassembling you're hopup and seei if anything is broken.
JerryMcGoulBerry is offline   Reply With Quote
Old October 7th, 2012, 02:52   #3
XZIVR
 
XZIVR's Avatar
 
Join Date: Mar 2011
Location: Calgary, AB
always shooting up? Sounds like you need to send it to rehab bahhahhhhahahha


Seriously though I'm gonna go with bent barrel..
XZIVR is offline   Reply With Quote
Old October 7th, 2012, 04:09   #4
HKGhost
 
HKGhost's Avatar
 
Join Date: Nov 2009
Location: Mississauga, ON
remove the bucking and give it a good clean. You can also use this time to inspect the hop up chamber's internals and see if anythings off. Sometimes the nub gets stuck down and has your hop up always up too high.
__________________
Please email me as I'm not on ASC too often.

Custom Build | Upgrades | Repairs | Maintenance
Contact: ghostgunwork@gmail.com / Private Message
HKGhost is offline   Reply With Quote
Old October 7th, 2012, 08:19   #5
coach
aka coachster
 
coach's Avatar
 
Join Date: Mar 2008
Location: T dot
Remove the barrel with hopup unit. Look down the inner barrel and adjust hopup. If the nub extends and retracts when you adjust it, then it's likely not the hopup. Bent barrel is possible.
coach is offline   Reply With Quote
Old October 7th, 2012, 09:14   #6
Rusty Lugnuts
Fainting Goat, Dictator of Quinte West
 
Rusty Lugnuts's Avatar
 
Join Date: Nov 2011
Location: Cobourg Ontario
Quote:
Originally Posted by coach View Post
Remove the barrel with hopup unit. Look down the inner barrel and adjust hopup. If the nub extends and retracts when you adjust it, then it's likely not the hopup. Bent barrel is possible.
roll the barrel along a flat surface if it's bent you will know.
Rusty Lugnuts is offline   Reply With Quote
Old October 7th, 2012, 10:03   #7
AngelusNex
formerly Sepulcrum
 
AngelusNex's Avatar
 
Join Date: May 2007
Location: Kingston,ON, aka Funkasia
Send a message via MSN to AngelusNex
Did you at any point disassemble the hop up unit? If so you may have put the bucking in the wrong way.
AngelusNex is offline   Reply With Quote
Old October 7th, 2012, 11:45   #8
venture
 
venture's Avatar
 
Join Date: Jun 2005
Location: Halifax
1) I had a customer disassemble his KWA hopup and he lost the spring that makes it return to zero. He over hopped his gun and when he tried to reduce it the lack of spring stopped the hopup from backing off.

He brought the gun to me complaining that the gun was shooting too weak. I took the hopup apart, found the missing item and replaced it. gun worked perfectly after that.

If you lost that spring and put too much hop on your gun (i.e. it shoots Up) then it may be stuck there.

2) I have had guns shoot up every shot and it was usually the bb catching the flash hider on the way out. Or a burr at the end of the inner barrel.
__________________

Visit us at :www.ventureairsoft.ca
venture is offline   Reply With Quote
Old October 7th, 2012, 11:55   #9
Ayashifx55
 
Ayashifx55's Avatar
 
Join Date: Jan 2008
Location: Quebec, Montreal
thank you very much everyone for your fast replies. It was actually a stupid thing.

At the end of the inner barrel , there was a plastic ring holding the barrel tight inside the outer barrel. The barrel was aiming down because of the lack of support. therefore always shooting up. The problem was that the ring got stucked with the flash hider, i removed the flash hider and the ring dropped in.

Thank you everyone.
__________________
No guns.

Last edited by Ayashifx55; October 8th, 2012 at 00:24..
Ayashifx55 is offline   Reply With Quote
Old September 27th, 2019, 19:21   #10
flavp5
 
Join Date: Feb 2003
Location: Newfoundland
I want to buy your gun
FS : Magpul PTS SCAR Masada ACR (400$)

But cant pm you or that thread
flavp5 is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
www.jsairsoft.com

All times are GMT -4. The time now is 05:38.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2019, vBulletin Solutions Inc.