US Navy SEALs

[nrados]

Well... looks I'm gonna have to post my SEAL-inspired load-out here after lurking through the entire thread!

Hopefully will have some pics soon, and then upload them quickly. Don't really have any pics of me right now for some reason... maybe I'm just too stealthy and manage to stay under the radar? hahahaha

[hot_shot under fire]

I took a chance and sprung for the Flyye 6094A in AOR1. I must admit that the colour match in person is STUNNING, although the pictures don't do it any justice. The quality is okay too. Not anything to brag about, however for airsofting purposes I figure it will hold up very well.

I also picked up some Toy Soldier AOR1's from a member here on ASC in addition to some Crye Precision G3 combat Pants. Decided to snap a couple of pictures.

As of right now this is in no way an impression. I have a LOT of gear to purchase before I will even consider this an impression. Until then I'll consider my current loadout an NSW inspired loadout.





Just had to do the Mark Owen pose (And yes, I do shoot lefty but I am right handed)

The A-TACS gear is a place-holder until I get the rest of my AOR1/AOR2/Multicam pouches. I still need plenty of little things, plus a proper blaster. All will come in due time.

Any constructive criticism/pointers is very welcome!

[TheAngrySniper]

Looks great, but far too... clean. :P

[Zack The Ripper]

What rifle platform are you trying to go with in the end; mid-length carbine, Mk18/SOPMOD?

[hot_shot under fire]

Well aware of everything being so clean as the only thing that I've gamed so far has been the Crye Multicam pants, and I've only worn those out to one game... Which happened to be my first game ever XD Everything else is brand new.

As for the rifle the one I currently have isn't anywhere near what I hope to be running in the end. Chances are I'll just put together a whole second upper receiver and switch it whenever I decide to run either the "SEAL" loadout or my own loadout for the day. I'll either do that, or I'll pick up an HK416 or MP7 GBBR.

Now if I stick with the M4, I'm thinking of going the SOPMOD Block 2 rout. It seems fairly common enough so that if I ever chose to do another loadout I could easily use the same rifle without an issue.

[Zack The Ripper]

I'm currently in prep to build a SOPMOD BlockII; not necessarily for a SEAL loadout, but I just wanna be OAF. Probably your best bet, easy to build and looks deadly.

I'm doing a GBB version. I'll eventually build a second mid-length upper with a Spectre DR. I have taken a lot of my loadout from a combination of the SEALs and JTF.

[Vince]

Bit of old school never hurts

[MrEvolution]

Sweet, Vince.

[Conker]

So anything that doesn't have pixels is now officially oldschool? :P

[Vince]

For that kind of shizz. Yeah, sure is. DCUsssssssssssssssssss

[S.H.I.E.L.D.]

Primary: G&P MK18 Mod 1 GBBR
- EoTech EXPS3-4
- Surefire M952v
- LDI DBAL(Still waiting on it.....)
- Garmin Fortrex 401
Secondary: KSC P226 - 6 Mags
Camouflage: Allwin AOR2

1st Line:
- Pantac Molle belt (Replacing with either a ICE Gunfighter belt or HSGI Sure grip)
- 2x BFG pistol mag pouch
- HSGI Mag Dump Pouch
- SOG Seal Pup knife
- 2x HSGI TACO (Single Mag)

2nd Line:
- LBT 6094a w/2 Medium Type III SAPI Plates
- 4x HSGI TACO (single mag and pistol mag)
- HSGI TACO (Single Mag)
- LBT 2645C Triple M4 Mag Shingle Insert
- 5.11 Radio Pouch (Used for P226 holster)
- HSGI Mini EOD/Utility Pouch
- LBT 6109A Utility Pouch
- HSGI Blowout Pouch w/Shears and IFAIK
- 2 HSGI Smoke Pouches
- LBT 6080A Hydration Pouch w/100oz Camelbak Milspec Antidote Bladder
- TCI Mast Antenna Relocation
- HSGI Admin Pouch

MISC:
- TMC Wrist mounted map pouch
- Digital Watch
- Oakley Pilot Gloves
- Wiley-X SG1 Full Seal Goggles
- Belleville Desert Combat Boots
- Under armour moisture wick gitch and undershirt
- Ops-Core Base Jump Helmet w/ USGI Rhino Mount
- AN/PVS 14 Night Vision Monocular

[KNIVEZS]

[Confessor]

Hi Guys,

Building a kit like this (dont really have too much stuff right now)

However to get a somewhat matching 6094 (I have a CIRAS already) short of getting the real deal (LBT 6094 @ close to $400) both Eb and airsoftpeak have replicas close to match the real one (Eb is TMC made and peak is a replica of the LBT) at less than $100, which one would you recommend?

Thanks

[lt_poncho]

Originally Posted by Frozen Tex

WHAT? No one's seen the classic Charlie Sheen flic "Navy SEALS"?

Blasphemy if they have not.

Leary (Corpsman) was the one with the RPK, Hawkins had a AKS, standard AK mag vest, OD web belt and black combat boots/black gloves. His pants are actually really really faded Rhodesian or DPM, not Desert DPM.
Black was the new OD back then in the 90's...damn...miss those days.

[lt_poncho]

Originally Posted by Vince

Bit of old school never hurts

That canteen holder looks BHI'ish; pre tan fastex, like 96'-97' - very nice mate. Clean and simple.