Show off your PDW!

tunabreath · June 13th, 2012, 20:55

Quote:

Originally Posted by Delta Zero-Six

That's one kick ass PDW tuna breath. What do you have all on it. I'm thinking of making a PDW like that.

It's pretty basic: an ICS KAC vert grip stolen from a friend's MP5, magpul PTS MS2 sling with RSA, a bit of tape on the stock for comfort. The red dot is an ElementMRDS (DO NOT RECOMMEND, the recoil really messes with it). I'm probably going to replace it with a primary arms T1 clone eventually. The silencer is an ACM KAC QD, with correct 6mm markings. The rail covers are Building Fire clone Larue Index Clips with a handstop for thumb pocketing. I'll also probably end up cutting the handstop down significantly to get everything further forward and a little lower profile.

Shrapnel[Op-For] · July 15th, 2012, 22:11

WE KAC PDW, nice and simple.

p.phresh · July 17th, 2012, 12:45

I present to you, the KAC Swordfish!

Doesn't exactly fit, but the barrel position and top rail are the perfect distance. At the moment there's no way to secure the front end to the gun. There needs to be some spacers for the claw mount to grab on to and secure to the top rail.

I would also have to remove the outer barrel or cut it to get the front end to butt up against the rails. Plus the inner barre would be too long and would need to be cut down.

Aside from that, I think it would be pretty bad-ass!

Short Round · July 17th, 2012, 20:28

Quote:

Originally Posted by p.phresh

I present to you, the KAC Swordfish!

Doesn't exactly fit, but the barrel position and top rail are the perfect distance. At the moment there's no way to secure the front end to the gun. There needs to be some spacers for the claw mount to grab on to and secure to the top rail.

I would also have to remove the outer barrel or cut it to get the front end to butt up against the rails. Plus the inner barre would be too long and would need to be cut down.

Aside from that, I think it would be pretty bad-ass!

WOW THAT's DIFFERENT

I like it

SuperHog · July 17th, 2012, 22:56

Quote:

Originally Posted by p.phresh

I present to you, the KAC Swordfish!

Doesn't exactly fit, but the barrel position and top rail are the perfect distance. At the moment there's no way to secure the front end to the gun. There needs to be some spacers for the claw mount to grab on to and secure to the top rail.

I would also have to remove the outer barrel or cut it to get the front end to butt up against the rails. Plus the inner barre would be too long and would need to be cut down.

Aside from that, I think it would be pretty bad-ass!

Very nice and creative.

I am sure a cnc shop can mill you a customer bottom picatinny brace that can match your special setup.

Viperfish · August 6th, 2012, 21:27

Well i guess this goes in here!

My VZ61 Skorpion I built out of parts I found. Took a while to find them all.

Shitty pics for now, I'll follow up with some better ones later.

The boys at TTAC learned about the pain this puppy throws downrange.

And yes, that's a drum mag on it.

sarosh · August 7th, 2012, 12:27

So sexy viperfish! mad jealous

Viperfish · August 7th, 2012, 16:00

Quote:

Originally Posted by sarosh

So sexy viperfish! mad jealous

Thanks!

Its actually a nice little gun, the tiny batts they carry though do not like sustained full auto, it seems to have an almost cool-down when that happens.

Sadly I am unable to get it to fire on semi, but who cares really, as a small backup smg with a drum it works great.

I just need to come up with a good way to sling it....

BennyBoy · December 4th, 2012, 20:09

My three ladies =D

The Dboys RDW now finally functional after wiring to the back (battery hidden in paracord

)
Shoots a nice and low 325 fps but kinda low RDS...at around 600 rps.. with a 7.4v lipo

Strelok · December 4th, 2012, 20:32

ICS M3 Grease Gun and a few other goodies. Christ, for being a grease gun, its rate of fire is absolutely insane. Wonderful little thing!

Shatter · December 8th, 2012, 13:39

Not mine.

Anderson Silva airsofts too.

(Taken from Airsoft Extreme's Facebook page)

:^) · December 8th, 2012, 14:03

Quote:

Originally Posted by Shatter

Not mine.

Anderson Silva airsofts too.

/Imgsnip

(Taken from Airsoft Extreme's Facebook page)

Man, that is awesome. I wish more people have awesome unique designs on their rifles. Thanks for sharing.

BennyBoy · December 9th, 2012, 20:23

good choice of rifle =D

XxBatteryxX · January 14th, 2013, 15:51

Not the greatest quality photos. Blackberry cameras suck. I want to get a magpul grip for it. Perhaps add a paracord, but first I'll have to figure out how to do that :P

Also for anyone with the same flash hider, do you find it makes the gun loud as hell?

And for those wondering about the CRR, its my ps3 clan tag :P We play a lot of Call of Duty and I thought it would be fun to rock it on my gun.

horto · February 14th, 2013, 12:17

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 8th, 2012, 13:39	#71
Shatter Trader rating Join Date: May 2009 Location: kommiefornia	Not mine. Anderson Silva airsofts too. (Taken from Airsoft Extreme's Facebook page) Last edited by Shatter; December 8th, 2012 at 13:43..

January 14th, 2013, 15:51	#74
XxBatteryxX Trader rating Join Date: Jul 2008 Location: Strathroy, ON	Not the greatest quality photos. Blackberry cameras suck. I want to get a magpul grip for it. Perhaps add a paracord, but first I'll have to figure out how to do that :P Also for anyone with the same flash hider, do you find it makes the gun loud as hell? And for those wondering about the CRR, its my ps3 clan tag :P We play a lot of Call of Duty and I thought it would be fun to rock it on my gun. Last edited by XxBatteryxX; January 14th, 2013 at 16:20..

February 14th, 2013, 12:17	#75
horto Trader rating Join Date: Jun 2009 Location: Toronto	__________________ H-61 "Acta non verba" They see us rollin, they hatin...

July 15th, 2012, 22:11	#62
Shrapnel[Op-For] Trader rating Join Date: Sep 2007 Location: Richmond B.C	WE KAC PDW, nice and simple.

August 7th, 2012, 12:27	#67
sarosh Trader rating Join Date: Jun 2009 Location: St. Catharines Ontario	So sexy viperfish! mad jealous

December 4th, 2012, 20:32	#70
Strelok Trader rating Join Date: Jun 2006 Location: Brandon Manitoba	ICS M3 Grease Gun and a few other goodies. Christ, for being a grease gun, its rate of fire is absolutely insane. Wonderful little thing!

Show off your PDW!

Airsoft Media