|
|
|
August 15th, 2009, 18:14
|
#16 |
|
Division
|
You can put any barrel in an AK, whether you decide to cover the extra length is up to you.
__________________
 Weee! |
|
|
|
August 15th, 2009, 18:39
|
#17 | |
|
Quote:
__________________
Live for nothing, or die for something They can have my rifle when they can pry it from my dead cold fingers |
|
|
|
|
|
August 15th, 2009, 18:54
|
#18 | ||
|
asexual lumbricus terrestris
|
RPK barrels will fit a 590mm.
__________________
Quote:
Quote:
|
||
|
|
|
|
August 16th, 2009, 02:07
|
#19 | |
|
Quote:
__________________
Travis R. (aka Trapper) Canadian Airsoft Marines. Field owner "GET SOME" |
|
|
|
|
|
August 16th, 2009, 02:15
|
#20 |
|
Perhaps he's making an RPK.
I put a bore-up into a RPK with a 590mm barrel... aaaaand the results are fantastic... Sadly it's always on the other team that I am.. sooo an LMG with INSANE range is not something I'm looking forward to playing against every week lol |
|
|
|
|
August 18th, 2009, 12:33
|
#21 |
|
why a psg1 barrel in my AK?
because I wanted a silencer and a riflescope and a guarder ftk. so I decided to buy the 150ftk bore up. and make it into a sniperrifle with small magz. I like the accuracy and distance. so it would be cool 4 me to play with them against theire high ROF. |
|
|
|
|
|
January 18th, 2014, 02:26
|
#22 |
|
This Thread!
HA! I laughed soo hard reading through this thread!
|
|
|
|
|
|
January 18th, 2014, 09:26
|
#23 |
|
freakonleash
|
I laughed so hard at resurecting a 5 y/o thread
__________________
''I will support my team, with superior accurate suppressive fire, and make a lot of noise doing it! SAW operator moto '' |
|
|
|
|
January 18th, 2014, 11:24
|
#24 |
|
Since the thread has been revived from the dead, I'll take the opportunity to ask why do people use bore up kits in DSG setups?
__________________
 SuperCriollo |
|
|
|
|
January 18th, 2014, 11:53
|
#25 | |
|
Can't fix my own guns. Willing to fix yours.
|
to get every bit of air out of the half stoke, TBH the only place where i would bother to try a bore up kit... i dont see much or any diff in most conventional setups
__________________
 Words to live by Quote:
|
|
|
|
|
|
January 18th, 2014, 15:32
|
#26 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
We've found there's no longer a reason to have a meter long barrel, anything past 400 is a complete waste
So yeah, only time the bore up kit would matter is in a DSG setup |
|
|
|
|
January 18th, 2014, 15:46
|
#27 | |
|
"bb bukakke" KING!
|
Quote:
since dsg halves the cylinder volume because it's essentially a short stroke on each shot... if you run a longer barrel you would need more air in the cylinder to match the barrel volume. The very rare instances in a full stroke setup you'd need one is in those guns that come with extremely long barrels over 450mm
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
|
|
January 18th, 2014, 17:17
|
#28 |
|
Useful if you want to build something that joule creeps too. I am in the process of tinkering with a cylinder that is bored out up to the cylinder head. So bore up size piston head & std cylinder head. Joule creep build I want. Ideally shy of 350 with 0.2's and maintaining a good fps with 0.32's (so a 1 gun does all machine)
|
|
|
|
|
January 18th, 2014, 17:28
|
#29 |
|
Not Eye Safe, Pretty Boy Maximus on the field take his picture!
|
so 1.1j with .20s and 1.5ish joules with .32s? That's a pretty cool idea actually...
|
|
|
|
|
January 18th, 2014, 19:50
|
#30 |
|
"bb bukakke" KING!
|
that's a pretty huge joule creep swing... I'm not sure if you can get that much difference.
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
|
|
|
  |
|
||||||
| Bookmarks |
|
|
 |
|
