H&k 416

Crunchmeister · April 30th, 2008, 11:43

Qlong... this thread must just be painful for you now...

Qlong · April 30th, 2008, 11:43

Does anyone know why my Hurricane 416 sights don't line up? One is taller than the other! It's so lame I just got this set.

Yeah, I want a VFC now lol, when I find a job the 416 is next on my list. Maybe the metal JG 416 when it comes out.

AngelusNex · April 30th, 2008, 21:36

>.> if I got a metal body for mine, with the massive barrel, it'd weigh similar to a LMG...

Crunchmeister · May 6th, 2008, 23:02

Well, I'm more than happy with my JG 416 and it's not going anywhere anytime soon without me. Would be nice to have a metal body, but I like it the way it is now wiht the fixed stock and the barrel extension. I just installed a tightbore barrel (unknown brand stainless steel 6.04 I bought in the classifieds a while back).

And IMO, the upgrade to the full stock and large battery was worth it. I'm rockin' a 9.6V 3800 mAh battery, and both the trigger response and rate of fire are nuts. Fear the sound of its 21 bb/s spray...

http://www.societyssorrow.com/_crunc...6/416_fire.mp3

Styrak · May 6th, 2008, 23:10

Quote:

Originally Posted by Crunchmeister

I'm rockin' a 9.4V 3800 mAh battery

Hmm. Do you mean 8.4v or 9.6v. Cause 9.4v doesn't exist.

Crunchmeister · May 6th, 2008, 23:18

OOps... yeah... 9.6V... sorry. Typo.

I should add that the battery is actually too big to remove from the stock without removing the buttplate, so I have to leave it in the gun when charging. However, it's not likely I'll ever run out of juice mid-game with a 3800 mAh Ni-MH battery.

Blackspeed416 · May 6th, 2008, 23:31

Quote:

Originally Posted by spl01t77

hey for any vfc 416 owners, how did you remove the pin so you can take the upper off? I can only get as far as removing the RAS and then get stuck trying to remove that 1 pin... arg!!!!

One you get the rise off pull the spring rod system back leaving the piston in place. Remove the rod from the back of the piston then slide the piston out. use the piston to push of the front pin on the receiver (dont worry about it fall it has a self catch) slide the top receiver off.

Its the same as RS.

PaCHeKo! · May 6th, 2008, 23:47

Quote:

Originally Posted by Blackspeed416

One you get the rise off pull the spring rod system back leaving the piston in place. Remove the rod from the back of the piston then slide the piston out. use the piston to push of the front pin on the receiver (dont worry about it fall it has a self catch) slide the top receiver off.

Its the same as RS.

Mouahhaah! This is so nice! Thank you for the tips... I should order mine very soon.

Blackspeed416 · May 7th, 2008, 13:42

Quote:

Originally Posted by Blackspeed416

One you get the rise off pull the spring rod system back leaving the piston in place. Remove the rod from the back of the piston then slide the piston out. use the piston to push of the front pin on the receiver (dont worry about it fall it has a self catch) slide the top receiver off.

Its the same as RS.

WOW Cold Drugs are powerful shit!!

Shirley · May 7th, 2008, 13:59

Looked through the whole thread, wow, people got some nice 416s, makes me want one... hmmm..

PaCHeKo! · May 7th, 2008, 14:01

As soon as my Paypal account if verified.. BANG! A VFC HK416 will sleep between me and my girlfriend! w00t! I never thought I would be able to buy one! Thank you overtime!

QLong, will you keep posting the pictures in the first posts?

Brit ter · May 7th, 2008, 14:12

Quote:

Originally Posted by Sepulcrum

yeah I tryed some cqb around the apartment switching back and forth from my 416 and my roommates m4 and wow... the massive barrel makes it impossible...

Removed iron sights! threw on a scope and extended the stock fully and she's a beaut!
Please don't pay too much attention to my awesome laptop.

might as well stick a scope on an M-16A3,would look the same!

T_A_N_K · May 7th, 2008, 14:30

HurricanE HK416

I decided to go with Mad Bull Bamboo grips which I think look freaking hot, which are available at http://www.airsoftparts.ca. Jugglez rocks, oh yes the bad ass flash hider is from him as well.

Crunchmeister · May 7th, 2008, 14:31

Yeah. I did one CQB game with some buddies last winter, and my only working gun was my M15 rifle. Was impossible to move around effectively indoors with it, so went with pistols only. It's amazing the difference in mobility between a 16 and 20" barrel. 4" doesn't seem like a whole lot, but it makes a big difference...

Shirley · May 7th, 2008, 14:46

T_A_N_K, those rail covers are hot!

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

April 30th, 2008, 11:43	#181
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Qlong... this thread must just be painful for you now... __________________

April 30th, 2008, 11:43	#182
Qlong Division Trader rating Join Date: Jun 2007 Location: Scarborough, Ontario	Does anyone know why my Hurricane 416 sights don't line up? One is taller than the other! It's so lame I just got this set. Yeah, I want a VFC now lol, when I find a job the 416 is next on my list. Maybe the metal JG 416 when it comes out. __________________ Weee! Last edited by Qlong; April 30th, 2008 at 11:47..

May 6th, 2008, 23:02	#184
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Well, I'm more than happy with my JG 416 and it's not going anywhere anytime soon without me. Would be nice to have a metal body, but I like it the way it is now wiht the fixed stock and the barrel extension. I just installed a tightbore barrel (unknown brand stainless steel 6.04 I bought in the classifieds a while back). And IMO, the upgrade to the full stock and large battery was worth it. I'm rockin' a 9.6V 3800 mAh battery, and both the trigger response and rate of fire are nuts. Fear the sound of its 21 bb/s spray... http://www.societyssorrow.com/_crunc...6/416_fire.mp3 __________________ Last edited by Crunchmeister; May 6th, 2008 at 23:18..

April 30th, 2008, 21:36	#183
AngelusNex formerly Sepulcrum Trader rating Join Date: May 2007 Location: Kingston,ON, aka Funkasia	>.> if I got a metal body for mine, with the massive barrel, it'd weigh similar to a LMG...

May 6th, 2008, 23:18	#186
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	OOps... yeah... 9.6V... sorry. Typo. I should add that the battery is actually too big to remove from the stock without removing the buttplate, so I have to leave it in the gun when charging. However, it's not likely I'll ever run out of juice mid-game with a 3800 mAh Ni-MH battery. __________________

May 7th, 2008, 13:59	#190
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Looked through the whole thread, wow, people got some nice 416s, makes me want one... hmmm.. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

May 7th, 2008, 14:01	#191
PaCHeKo! Trader rating Join Date: Jan 2008 Location: St-Jérôme, Québec	As soon as my Paypal account if verified.. BANG! A VFC HK416 will sleep between me and my girlfriend! w00t! I never thought I would be able to buy one! Thank you overtime! QLong, will you keep posting the pictures in the first posts? __________________ P.M.C. - Prostituée Militaire de Campagne.

May 7th, 2008, 14:30	#193
T_A_N_K Trader rating Join Date: Sep 2006	HurricanE HK416 I decided to go with Mad Bull Bamboo grips which I think look freaking hot, which are available at http://www.airsoftparts.ca. Jugglez rocks, oh yes the bad ass flash hider is from him as well.

May 7th, 2008, 14:31	#194
Crunchmeister Trader rating Join Date: Nov 2007 Location: In your bedroom going though your underwear drawer	Yeah. I did one CQB game with some buddies last winter, and my only working gun was my M15 rifle. Was impossible to move around effectively indoors with it, so went with pistols only. It's amazing the difference in mobility between a 16 and 20" barrel. 4" doesn't seem like a whole lot, but it makes a big difference... __________________

May 7th, 2008, 14:46	#195
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	T_A_N_K, those rail covers are hot! __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

H&k 416

Airsoft Media