|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 29th, 2009, 17:23
|
#1 |
|
Coloring trademarks without painting the rest of the slide.....
ok, i thought i had this all figured out, but i was wrong. my G26 (KSC) has WHITE trades on the metal slide, and they drive me insane!!!!!!!
soooo, i went out and got this........  well, the tip is too large to get into the etching where the white paint is. so, how the hell do i get the white to be BLACK like the rest of the slide? pic below of real steel, and airsoft, notice the white letters, they make me mad!!!!!!!   HELP, i hate the white!!!!!!!!!!! |
|
|
|
|
July 29th, 2009, 17:39
|
#2 |
|
What you need to do is get a good oil based paint. Add some thinner, to make it very runny. Have a clean rag, damp with thinner/remover. Lightly spread the thined oil paint over the lettering. Then lay the gun flat and run the rag over the flat surface of the slide.
The oil based paint will cover the bright white lettering, and the rag will wipe off the excess paint. If you wipe off the paint right after applying it, it will not stick to the slide. A few light coats and the white lettering will not be visible. If you mess it up too bad, PM me, I own a custom duracoating shop, and I'll fix it up for you. ~Shooter |
|
|
|
|
|
July 29th, 2009, 18:17
|
#3 |
|
Prancercise Guru
|
Just get a black crayon.
Rub the crayon over the spots you want black and buff any excess off with a rag.
__________________
Airsoft, where nothing is hurt but feelings. |
|
|
|
|
July 30th, 2009, 10:41
|
#4 |
|
thanks guys!!! PM sent about the custom duracoat
|
|
|
|
|
|
July 31st, 2009, 13:21
|
#5 |
|
wow, the crayon worked!!!!! thanks for the tip!!!!
  thank you guys!!! |
|
|
|
|
|
August 3rd, 2009, 11:41
|
#6 |
|
ok, just dullcoated the slide, and upon cleaning it is preperation for the dura coat, you guessed it, the crayon came out
 SOOOO, back to the drawing board........ |
|
|
|
|
|
August 6th, 2009, 23:54
|
#7 |
|
Black Spray paint?
|
|
|
|
|
August 6th, 2009, 23:55
|
#8 |
|
|
sorry didnt read the whole title..never mind
|
|
|
|
|
August 7th, 2009, 02:00
|
#9 |
|
Just black crayon it, it aint coming out unless you take a screw driver and pick at it. No point in duracoating.
__________________
"Don't you know the first law of physics? Anything fun costs atleast $8" 
|
|
|
|
|
August 7th, 2009, 02:14
|
#10 |
|
* AV revoked *
|
How about thinking to get a new slide like Guarder slide ? I used to have a Glock 19 and that white trade mark make insane as well, I end up polish it but finally I end up have 3 extra slide. Better buy a new slide than waste your time figure out how to make it black.
__________________
 
|
|
|
|
|
August 8th, 2009, 03:55
|
#11 |
|
every slide i have found for the G26 comes with the white letters. i have asked every retailer before buying (even though in pictures they are all black trades) and they all reply "sorry, slide comes with white trades"
it drives me nuts, i mean, why post a pic of the black trades if that is NOT what you get!!!! hell, here is the pic of the gun's ad, and the trades that come with it are white!!!!!!!!!!!! aaaaaaaaaahhhhhhhhhhh!!!!! edit: wow, i just noticed TODAY, that they changed their pic on the site, it now actuallly shows the white trades. (interesting) WGC advertises this, and i emailed them, and sure enough, it has white trades....  edit#2: i just found this, and emailed them. lets see if it is white or black trades, cause the pic shows black............ .jpg) http://www.airsoftshop.com/product_i...rb60c09sqle7k1 Last edited by MikeMcNair; August 8th, 2009 at 04:04.. Reason: found another place....... |
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
