|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
May 18th, 2009, 00:06 | #1 |
Privateer Airsoft
|
Delta Force metal body help
Hi, I'm trying to disassemble my tm m733, it has a delta force metal body, and I've come to a roadblock. Small, but annoying. The mag release button doesn't have an exposed screw, so I can't take it off, so I can't get to my mechbox. Where the screw is it looks like there is a cover instead. Anyone know how to get it off? thanks.
Last edited by Spike; May 18th, 2009 at 00:21.. Reason: pics |
May 18th, 2009, 00:23 | #2 |
Division
|
Push the release button all the way in, and turn it from the other side.
__________________
Weee! |
May 18th, 2009, 00:27 | #3 |
Privateer Airsoft
|
Turn the whole thing, or just the button?
|
May 18th, 2009, 00:28 | #4 |
The part the other side of the lower receiver... the one attach to the button
__________________
HellRanger 1969-2007 LRRP FOREVER 101e 506Pir Fox Company - SHTYK NOZH |
|
May 18th, 2009, 00:30 | #5 |
Suburban Gun Runner
|
I had the same problem. First put some low tack tape like blue or green painters tape on the other side around the mag release or you will scratch the body like I did. Then push the button as far as it will go. Hold it in place and turn the release lever clockwise.
|
May 18th, 2009, 00:31 | #6 |
Privateer Airsoft
|
There we go! Thanks guys.
|
|
Bookmarks |
Thread Tools | |
|
|