Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

General upgrading of an AEG : looking for a thread that surely exists

:

Doctor's Corner

Reply
 
Thread Tools
Old April 22nd, 2009, 13:34   #1
Silverthorn
 
Silverthorn's Avatar
 
Join Date: Mar 2008
Location: Sainte-Julie, Quebec
General upgrading of an AEG : looking for a thread that surely exists

I tried searching around for a thread like what I need but I guess the keywords are just too general. No luck.

I am in the processing of acquiring a used CYMA MP5-J to use as an upgrade platform and to learn about mechbox and the general mechanics (and electricity) of AEGs.

I am looking for a thread or web site that covers all the most common upgrades you can give a gun to increase FPS, increase ROF, increase accuracy, increase durability, etc...

I want to refer to those to learn and look at what parts I need to buy and budget it all.

Thanks!
__________________
Team N.A.P.K.I.N.S (Ninjas And Pirates Kommando Infiltration Night-ops Specialists)

Silverthorn is offline   Reply With Quote
Old April 22nd, 2009, 13:41   #2
sgtscarfy
 
sgtscarfy's Avatar
 
Join Date: May 2007
Location: Toronto
Well assembly and dis assembly try mechbox.com
sgtscarfy is offline   Reply With Quote
Old April 22nd, 2009, 13:43   #3
m102404
Tys
 
m102404's Avatar
 
Join Date: Apr 2006
Location: Toronto
These are stickied in the Upgrades & Mods section

Smart and Not So Smart Upgrades

Why do I need to Upgrade

As an aside...sorry that you picked a Cyma/TSD MP5...they're so wonky and crap that you'll be more fighting the loose tolerances (mechbox, parts and body) than learning anything.

It's sounds odd...but get a good mechbox to "practice" on...or at least start with a good shell if you're building it from scratch. The parts stay in place, more parts will fit properly, they'll tend to stay in place while under tension a bit easier.....

With bodies...you can't go too far wrong with an M4 for a common platform. But AK/UMP/G36 AEGs are actually easier to work on (they're all version 3 mechboxes...which is 90% the same as a V2). There's less to take apart to get the mechbox in and out...so you can try something and then test it out without having to reassemble the whole thing.

Anyways...best of luck. Degrease (just wipe the parts off with a towel) and work on shimming first. Plastic bushings or not...the concepts the same.

Tys

Last edited by m102404; April 22nd, 2009 at 14:15..
m102404 is offline   Reply With Quote
Old April 22nd, 2009, 15:48   #4
Silverthorn
 
Silverthorn's Avatar
 
Join Date: Mar 2008
Location: Sainte-Julie, Quebec
Quote:
Originally Posted by m102404 View Post
As an aside...sorry that you picked a Cyma/TSD MP5...they're so wonky and crap that you'll be more fighting the loose tolerances (mechbox, parts and body) than learning anything.
Thanks for all the details. Already have a better shell to replace it with I just want to mess around and manage to make it work again!
__________________
Team N.A.P.K.I.N.S (Ninjas And Pirates Kommando Infiltration Night-ops Specialists)

Silverthorn is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 21:11.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.