battery problems... tm ak47 and 8.4 2400 mah

[oniwagamaru]

i bought a battery for my ak47... it works fine and everything but my only problem is putting the damned thing in the battery compartment of the but stock. it does not fit! can anyone give me an advice or a solution to this problem or do i need to buy another battery? any advice or suggestion is appreciated :???:

[yuhaoyang]

Make sure the wire is in the hole/compartment thingy in the bottom of the stock. Other than that, if it is a solid stock with no objects other than the wire inside it, it's probably magic.

[Defcon_Carl]

you can try to buy an intellect 8.4v 1600 mAH mini battery that should give you alot more space and pack more punch than your stock battery.

[ross_stick]

is it too long or too wide or what i have seen people have to carve a bit of the inside of the stock to get some slightly larger bats in there

[Cheesevillage]

Originally Posted by carl05229

you can try to buy an intellect 8.4v 1600 mAH mini battery that should give you alot more space and pack more punch than your stock battery.

This is misinformation. A nicad 8.4 2400mah will be way crazier than any mini.


Just carve your stock out a bit. If its the wiring making the battery just a little bit too big at the end maybe put your battery in the "wrong" way and shorten the wires coming from the mechbox.

[oniwagamaru]

thanks for the replies... i took the black cap on the battery though and it seems fine... it fits albeit tight and snug... im just worried about the wires getting cut, is the black cap of the battery even important?

[yuhaoyang]

Yup... On some they are not used, but if yours already has it and you take it out, the wires will shift and yeah... Don't. If it fits and you have somewhere to stuff the wires then it's fine.