|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
March 2nd, 2009, 21:11 | #1 |
KSC G19 bb's Dropping Out of barrel
Hi there, I read about a similar problem some time ago and tried searching the forums for info but couldn't find anything (maybe it was on another site)...So here goes.
When I fire, instead of shooting the bb out with a high velocity like it should, the bb just drops out of the inner barrel. The blowback seems fine, its just that the bb's do not have enough force to propel them out of the inner barrel with some power. I tried turning the hop-up all the way down because i thought this may be stopping the bb's from going anywhere but the same thing still happens. Any ideas appreciated! |
|
March 2nd, 2009, 21:18 | #2 |
Probably has to do with the internal gas parts, and the valve inside the blowback unit.
|
|
March 2nd, 2009, 21:31 | #3 |
Division
|
Check parts #24 and #25. The head of the rocket valve should be pushed up against the pin (part #26) by the spring (part #25).
__________________
Weee! Last edited by Qlong; March 2nd, 2009 at 21:35.. |
March 2nd, 2009, 21:45 | #4 |
I replaced the rocket valve (part 24) with spare one that i had lying around and now it works fine. Its strange because the rocket valve i had in there before was metal too and wasn't broken or deformed.
Thanks for the help guys. |
|
March 2nd, 2009, 22:04 | #5 |
Official ASC Bladesmith
|
Good chance a double feed too. One BB rips out and the other drops out. Or, your hop up rubber is FUBAR.
|
|
Bookmarks |
Thread Tools | |
|
|