TM Hi-capa slide failure

Tillude · February 11th, 2009, 11:50

sorry about my spelling..

Im from the netherlands and i have TM hi-capa, and i recently bought a secend hand Metal Slide for the hi-capa. The following is the problem

installing is now problem, loading works good , but when i fire no bb comes out , the slide does goes backwards but innerchambers stays in the most front position.

The blowback unit seems to fit pretty good ( if i measure the depth it is correct )
I have no idea now were i should look a this time.....and over here no one seems to be able help ...anyone got any ideas ???

jaoquinz · February 11th, 2009, 12:09

Can you post pictures of the gun and the internals of slide? Maybe that would help.

Daiviet · February 11th, 2009, 12:26

If its loading properly... and cycling.. Maybe something happened with the inside of the loading nozzle and is causing the valve inside to get stuck forward making all the gas go back and none to the bb.

Shirley · February 11th, 2009, 13:10

What brand of the slide is it? Check your hop-up too.

Tillude · February 11th, 2009, 14:08

ok when i change it back to the standard slide it works go so the BBU is in good shape ..

The slide is a Davindson something (wildcat )...

when i load it the inside does come to the back and loads a bb ....but on gas it isnt moving ....imm gonna look a the gas splitting ...

Tillude · February 12th, 2009, 03:59

most upper picture is the position it keep when i fire

Azathoth · February 13th, 2009, 01:26

From the picture, I would guess that the spring on the blow back chamber isnt seated properly and has popped out. Try teflon tape to secure the spring in place.

Styrak and Illusion would have a better idea.

Shirley · February 13th, 2009, 01:30

What that white spot inside the slide?

Have you upgraded anything else?
How about the springs?

Styrak · February 13th, 2009, 01:34

Quote:

Originally Posted by Tillude

most upper picture is the position it keep when i fire

I think you'll need to get a Airsoft Surgeon Hard Piston. The stock one catches on the slide, because they're made by the same company, or replicas of, Shooters Design/Airsoft Surgeon slides, and those don't like stock loading nozzles.

I have a Davidson Custom slide as well. I could try swapping my stock piston into my DC slide, and see if it catches like yours if you want?

Tillude · February 13th, 2009, 03:16

Azatoth : no the leaf ( if i am correct ) stays in place ..

Mr Hitman : the with spot i a sanded ( or filled i dont know the diference in english

) down by the previous owner .

Styrak : i f you can try that , that would be great.....

ILLusion · February 13th, 2009, 03:42

I had this same problem happen with old generation Airsoft Surgeon slide. It was remedied by using the Airsoft Surgeon air seal nozzle.

Those earlier generation slides would not work properly with stock or Shooters Design nozzle.

Tillude · February 13th, 2009, 04:13

hmmm .thats not good...because here in europe there arent that many shops that sell those things....nevermind having it in stock..

are those specially for the hi-capa or universal ???

Styrak · February 13th, 2009, 04:16

Quote:

Originally Posted by Tillude

hmmm .thats not good...because here in europe there arent that many shops that sell those things....nevermind having it in stock..

are those specially for the hi-capa or universal ???

They're specific to the gun yes. You'll just have to order from Hong Kong.

ILLusion · February 13th, 2009, 04:32

This is what you're looking for:

http://www.redwolfairsoft.com/redwol...l?prodID=25657

Tillude · February 13th, 2009, 04:58

will a guarder one also work ??? , this one is availeble in europe atm

http://www.airsoft-one.be//product_i...ddfe1d20fbb405

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 11th, 2009, 11:50	#1
Tillude Trader rating Join Date: Feb 2009	TM Hi-capa slide failure sorry about my spelling.. Im from the netherlands and i have TM hi-capa, and i recently bought a secend hand Metal Slide for the hi-capa. The following is the problem installing is now problem, loading works good , but when i fire no bb comes out , the slide does goes backwards but innerchambers stays in the most front position. The blowback unit seems to fit pretty good ( if i measure the depth it is correct ) I have no idea now were i should look a this time.....and over here no one seems to be able help ...anyone got any ideas ???

February 11th, 2009, 13:10	#4
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	What brand of the slide is it? Check your hop-up too. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

February 11th, 2009, 14:08	#5
Tillude Trader rating Join Date: Feb 2009	ok when i change it back to the standard slide it works go so the BBU is in good shape .. The slide is a Davindson something (wildcat )... when i load it the inside does come to the back and loads a bb ....but on gas it isnt moving ....imm gonna look a the gas splitting ... Last edited by Tillude; February 12th, 2009 at 03:59.. Reason: added photos

February 11th, 2009, 12:09	#2
jaoquinz Trader rating Join Date: Dec 2008 Location: Hong Kong	Can you post pictures of the gun and the internals of slide? Maybe that would help.

February 11th, 2009, 12:26	#3
Daiviet Captain Sunshine Trader rating Join Date: Aug 2006	If its loading properly... and cycling.. Maybe something happened with the inside of the loading nozzle and is causing the valve inside to get stuck forward making all the gas go back and none to the bb.

February 12th, 2009, 03:59	#6
Tillude Trader rating Join Date: Feb 2009	most upper picture is the position it keep when i fire

February 13th, 2009, 01:30	#8
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	What that white spot inside the slide? Have you upgraded anything else? How about the springs? __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

February 13th, 2009, 03:16	#10
Tillude Trader rating Join Date: Feb 2009	Azatoth : no the leaf ( if i am correct ) stays in place .. Mr Hitman : the with spot i a sanded ( or filled i dont know the diference in english ) down by the previous owner . Styrak : i f you can try that , that would be great.....

February 13th, 2009, 03:42	#11
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	I had this same problem happen with old generation Airsoft Surgeon slide. It was remedied by using the Airsoft Surgeon air seal nozzle. Those earlier generation slides would not work properly with stock or Shooters Design nozzle. __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

February 13th, 2009, 04:13	#12
Tillude Trader rating Join Date: Feb 2009	hmmm .thats not good...because here in europe there arent that many shops that sell those things....nevermind having it in stock.. are those specially for the hi-capa or universal ??? Last edited by Tillude; February 13th, 2009 at 04:15.. Reason: extra

February 13th, 2009, 04:32	#14
ILLusion GBB Whisperer Trader rating Join Date: Jun 2002 Location: Toronto	This is what you're looking for: http://www.redwolfairsoft.com/redwol...l?prodID=25657 __________________ *Advanced Airsoft Armaments and Enhancements* Quick to the gun, sure of your grip. Quick to the threat, sure of your shot. Diligentia, Vis, Celeritas Accuracy, Power, Speed

February 13th, 2009, 04:58	#15
Tillude Trader rating Join Date: Feb 2009	will a guarder one also work ??? , this one is availeble in europe atm http://www.airsoft-one.be//product_i...ddfe1d20fbb405

TM Hi-capa slide failure

Doctor's Corner