Mag Feeding Issue

delta76 · February 6th, 2009, 16:44

I recently purchased some King Arms 100 round Mid Cap MP5 mags and have feeding issues. When loaded the mags feed the first bb but then stop feeding. I've tried shaving the retainer lip, working in the springs manually with a prod, and oiling with silicone oil. I've realized that the retainer lip is not the issue because when I manually release it in order to empty the mag after a couple bbs are released the rest remain jammed about an inch down and require a good whack to loosen them. So before they end up in the garbage does anyone have any other ideas? Thanks

Shirley · February 6th, 2009, 16:46

Try using different brand BBs.
Open up the magazine and shave some of the walls inside the tube.

delta76 · February 6th, 2009, 16:49

I've read about opening them up but it doesn't look like you can crack these ones open, they're the plastic version. Has anyone ever tried to open these?

ShelledPants · February 6th, 2009, 16:52

When you pull the retaining latch, do the bbs expel from the magazine?

Also, does the gun fire without a problem with other magazines?

What's the Brand/Model of the gun?

delta76 · February 6th, 2009, 16:58

Its an Aftermath Broxa with a new hop up, I've managed to crack one of them open and I guess I can go from there. No feeding issues with other mag brands that I've tried.

m102404 · February 6th, 2009, 23:51

Sorry...you're fubar'd.

A whole series of KA G36 mags had the same issue where bbs were "doublestacking" too much in the mag and jamming (essentially 2 bbs wedging sideways). Not sure if it was due to the channel being rough or too wide...but far from fixable.

Sucks to hear that their MP5 mags might be doing the same thing.

delta76 · February 7th, 2009, 04:20

Yup I'm fubar'd LOL, well at least I got them for a good price and I know never to buy King Arms again at least not MP5, anyone tried the Star 95 rnd. MP5 midcaps? Do they have the same issues?

zone 69 · February 7th, 2009, 04:40

Here http://www.airsoftcanada.com/showthread.php?t=71646

And here http://www.airsoftcanada.com/showthr...King+Arms+mags

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

February 6th, 2009, 16:44	#1
delta76 Trader rating Join Date: Dec 2008 Location: Toronto	Mag Feeding Issue I recently purchased some King Arms 100 round Mid Cap MP5 mags and have feeding issues. When loaded the mags feed the first bb but then stop feeding. I've tried shaving the retainer lip, working in the springs manually with a prod, and oiling with silicone oil. I've realized that the retainer lip is not the issue because when I manually release it in order to empty the mag after a couple bbs are released the rest remain jammed about an inch down and require a good whack to loosen them. So before they end up in the garbage does anyone have any other ideas? Thanks

February 6th, 2009, 16:46	#2
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Try using different brand BBs. Open up the magazine and shave some of the walls inside the tube. __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

February 6th, 2009, 16:52	#4
ShelledPants Trader rating Join Date: Feb 2008 Location: Toronto, On	When you pull the retaining latch, do the bbs expel from the magazine? Also, does the gun fire without a problem with other magazines? What's the Brand/Model of the gun? __________________ Ár skal r?*sa, sá er annars vill fé eða fjör hafa. Sjaldan liggjandi úlfur lær um getur né sofandi maður sigur.

February 6th, 2009, 16:49	#3
delta76 Trader rating Join Date: Dec 2008 Location: Toronto	I've read about opening them up but it doesn't look like you can crack these ones open, they're the plastic version. Has anyone ever tried to open these?

February 6th, 2009, 16:58	#5
delta76 Trader rating Join Date: Dec 2008 Location: Toronto	Its an Aftermath Broxa with a new hop up, I've managed to crack one of them open and I guess I can go from there. No feeding issues with other mag brands that I've tried.

February 6th, 2009, 23:51	#6
m102404 Tys Trader rating Join Date: Apr 2006 Location: Toronto	Sorry...you're fubar'd. A whole series of KA G36 mags had the same issue where bbs were "doublestacking" too much in the mag and jamming (essentially 2 bbs wedging sideways). Not sure if it was due to the channel being rough or too wide...but far from fixable. Sucks to hear that their MP5 mags might be doing the same thing.

February 7th, 2009, 04:20	#7
delta76 Trader rating Join Date: Dec 2008 Location: Toronto	Yup I'm fubar'd LOL, well at least I got them for a good price and I know never to buy King Arms again at least not MP5, anyone tried the Star 95 rnd. MP5 midcaps? Do they have the same issues?

February 7th, 2009, 04:40	#8
zone 69 Trader rating Join Date: Sep 2006 Location: KELOWNA , B.C CANADA, PLANET EARTH	Here http://www.airsoftcanada.com/showthread.php?t=71646 And here http://www.airsoftcanada.com/showthr...King+Arms+mags

Mag Feeding Issue

Doctor's Corner