Glock 19 Feeding Problem

Doc · January 3rd, 2009, 00:37

my glock 19 recently all of a sudden stoped feeding correctly, when ever the slide comes back a bb gets jammed between the barrel and the place where the bb gets taken out of the mag. does anyone know a solution to this?

i beleave the glock is a KSC, i need to check.

i use propane not duster. and its happening with all my mags. i oiled it after the problems started happening, still nothing.

thanks

Brian McIlmoyle · January 3rd, 2009, 01:38

is the feed ramp still there?

Doc · January 3rd, 2009, 01:41

yes it is, looking at it again it looks like the gas funnel (for lack of a better discription) isnt pulling the barrel back at all and that is leaving a small gap where the bbs get lodged. any ideas?

WhatTheWho · January 4th, 2009, 05:00

Double check your blowback chamber springs. If they were not reinstalled correctly, it will not pull back the blowback chamber properly, which in turn causes misfeeds.

Shirley · January 4th, 2009, 05:18

Trying pulling back the slide slowly and moving it back up slowly and see again.
Have you tried different mags?

White_knight · January 4th, 2009, 05:50

turn your hop up all the way up. same thing happend to my KSC usp.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 3rd, 2009, 00:37	#1
Doc Trader rating Join Date: Apr 2006 Location: Toronto	Glock 19 Feeding Problem my glock 19 recently all of a sudden stoped feeding correctly, when ever the slide comes back a bb gets jammed between the barrel and the place where the bb gets taken out of the mag. does anyone know a solution to this? i beleave the glock is a KSC, i need to check. i use propane not duster. and its happening with all my mags. i oiled it after the problems started happening, still nothing. thanks __________________ Guardians of Asgaard

January 3rd, 2009, 01:38	#2
Brian McIlmoyle 8=======D Trader rating Join Date: Apr 2005 Location: Toronto	is the feed ramp still there? __________________ Brian McIlmoyle TTAC3 Director CAPS Range Officer Toronto Downtown Age Verifier OPERATION WOODSMAN If the tongue could cut as the sword does, the dead would be infinite

January 3rd, 2009, 01:41	#3
Doc Trader rating Join Date: Apr 2006 Location: Toronto	yes it is, looking at it again it looks like the gas funnel (for lack of a better discription) isnt pulling the barrel back at all and that is leaving a small gap where the bbs get lodged. any ideas? __________________ Guardians of Asgaard

January 4th, 2009, 05:00	#4
WhatTheWho Trader rating Join Date: Dec 2002 Location: Edmonton, AB	Double check your blowback chamber springs. If they were not reinstalled correctly, it will not pull back the blowback chamber properly, which in turn causes misfeeds. __________________ "The greatest pleasure in life is doing what people say you cannot do."

January 4th, 2009, 05:18	#5
Shirley A-56 aka Mr.Hitman Trader rating Join Date: Nov 2007 Location: Toronto, ON	Trying pulling back the slide slowly and moving it back up slowly and see again. Have you tried different mags? __________________ CANADIAN AIRSOFT PRACTICAL SHOOTING (CAPS) CAPS DIRECTOR # 0047

January 4th, 2009, 05:50	#6
White_knight Trader rating Join Date: Jul 2006	turn your hop up all the way up. same thing happend to my KSC usp. __________________ Burnaby / Vancouver area Age verifier

Glock 19 Feeding Problem

Doctor's Corner