|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
December 11th, 2008, 23:43
|
#1 |
|
PSG-1 problems
hi, guys
i have a PSG-1, second hand. thats use 10.8V battery. i got the gun with a empty 10.8V battery. i charge it with "universal smart charger". only 5 minutes the charger's green light flashing, means "charge complete". i think thats impossible. so i charge the battery a couple times with plug in and out. finally, i plug the battery in gun. but gun still cant fire and battery, stock and cable so hot! i dont know whats wrong with it. i plug battery out. who can explain and help me. THANK YOU SO MUCH  PS: im new guy to AEG. so plz make some words i can understand  Thank You Again 
|
|
|
|
|
December 11th, 2008, 23:49
|
#2 |
|
Official Crybaby Chairsofter
|
Maybe the battery is bad?
|
|
|
|
|
December 11th, 2008, 23:54
|
#3 |
|
Or the mechbox is jammed.
__________________
 Airsoft Sales and Repair/Upgrade Services |
|
|
|
|
December 11th, 2008, 23:59
|
#4 |
|
If you're not certain about the battery make sure your charger goes up to 10.4v ... and what they said ^
__________________
CAPS Shooter WA SV Infinity 5" Classic |
|
|
|
|
December 12th, 2008, 00:08
|
#5 |
|
10.4V?the charger can adjustment by itself. i think so. maybe battery is bad... i think i need a gunsmith to face it
|
|
|
|
|
|
December 12th, 2008, 00:22
|
#6 | |
|
The charger can adjust itself up to a certain voltage only.
And if the battery only gets a few miliamps, it is normal that the cables and battery get hot. If I remember correctly, you can only do up to 9.6v with that charger. The next step is one that charge from 10.4v to 14.4v (These chargers come in 4 version, 1-5 cells, 6 to 8, 9 to 12 and finally 24v). Get an other battery and try it with a good, known to be good battery. Also, the PSG-1 uses a pre-cock system. It means that you will only be able to shoot it with a fully charged pack.
__________________
Quote:
|
|
|
|
|
|
December 12th, 2008, 00:46
|
#7 |
|
yes, your right. ill take a new battery to try it.
you know, the battery, stock and cables was hot as burning... |
|
|
|
|
|
December 12th, 2008, 00:49
|
#8 |
|
the charger is no problem for 10.8V battery, right?
|
|
|
|
|
|
December 12th, 2008, 13:26
|
#9 | |
|
|
Check on your charger. As I said, there is a few version of these "Smart Chargers"
It should be rated in cell count or voltage. 10.8v is 9 cells. If your charger can only go to 8 cells, then it won't be able to charge it. Burning hot is between 50 and 70 degC for most people. (Hot tap water is around that). A battery can withstand up to 120-150 degC, not without damage however.
__________________
Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
