TM discharger

Tsahal · December 9th, 2008, 16:49

Hi guys I really need your help. I bought a TM discharger this one:

And I just got my new Sanyo 9.6V 1700mah NICD nunchuck battery. I was wondering if this discharger will be good for it or its gona broil ? Cause the fact is that I didnt pay attention if it was written on the box or not but even if it was written I dont read japenese lool !!!

I hope you will be able to help me guys

incrediboy729 · December 10th, 2008, 00:36

So long as you're sure your battery is NI-CAD then to my knowledge it should be fine. But like i said i'm not 100% sure so don't come knocking down my door if it toasts your battery

.
A link to your exact model of discharger that you bought would be helpful

And btw fyi Ni-cads should be discharged before each charging.
Good luck.
-Brett

Casual Friday · December 10th, 2008, 01:17

If memory serves me right, only NiCd batteries should be discharged before charging. NiMh should just be topped off.

This is what I've been doing with my batteries, so far they've lasted me.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

December 9th, 2008, 16:49	#1
Tsahal Trader rating Join Date: May 2008 Location: Montreal	TM discharger Hi guys I really need your help. I bought a TM discharger this one: And I just got my new Sanyo 9.6V 1700mah NICD nunchuck battery. I was wondering if this discharger will be good for it or its gona broil ? Cause the fact is that I didnt pay attention if it was written on the box or not but even if it was written I dont read japenese lool !!! I hope you will be able to help me guys __________________ CA M4/WE 1911 EF-05

December 10th, 2008, 00:36	#2
incrediboy729 Trader rating Join Date: Dec 2006 Location: California, USA	So long as you're sure your battery is NI-CAD then to my knowledge it should be fine. But like i said i'm not 100% sure so don't come knocking down my door if it toasts your battery . A link to your exact model of discharger that you bought would be helpful And btw fyi Ni-cads should be discharged before each charging. Good luck. -Brett __________________

December 10th, 2008, 01:17	#3
Casual Friday Trader rating Join Date: Sep 2005 Location: Calgary, Alberta	If memory serves me right, only NiCd batteries should be discharged before charging. NiMh should just be topped off. This is what I've been doing with my batteries, so far they've lasted me.

TM discharger

Doctor's Corner