|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
July 15th, 2008, 23:07
|
#1 |
|
Hop-up issues.
Finally got my CA SD5 up and running today, took it out to fire a few mags through. While adjusting the hop-up, I notice it didn't seem to adjust much.
All the way off it arcs down quite fast. On the way up to the top, less arc yet still less then center. I'm assuming I'll be needing a new hopup rubber, but if someone could confirm that with me I'd appreciate it. Also suggestions for of a rubber to best suit a 350 fps Classic army SD5. Thanks in advance. |
|
|
|
July 15th, 2008, 23:19
|
#2 |
|
could be a couple of things actually
- hop up rubber is covered in oil - hop up buffer tube is missing - hop up buffer tube is mis aligned with the hop up rubber in any case the hop up rubber is probably not going down all the way. |
|
|
|
|
July 15th, 2008, 23:36
|
#3 |
|
|
Now that I think of it, I did spray some silicone in the mag well probably 4 days ago, perhaps that is my problem.
|
|
|
|
|
July 15th, 2008, 23:39
|
#4 |
|
|
try washing the rubber in dish detergent and hot water =\
|
|
|
|
|
July 15th, 2008, 23:51
|
#5 |
|
|
I'll do that, thanks.
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
