Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Cleaning the inside of lense G&P Aimpoint

:

Doctor's Corner

Reply
 
Thread Tools
Old January 22nd, 2008, 22:09   #1
Solizone
 
Join Date: Jan 2007
Cleaning the inside of lense G&P Aimpoint

Inside of the front lense on my G&P Aimpoint is filled with dusts and tiny dirt specs. I can't just wipe it off because it's inside the "tube" How could I clean it? Is there a way where I could remove the front and/or back lense out of the optic and clean it? Thanks. It's kinda cloudy when I look through from all the dusts and tiny dark specs.
Solizone is offline   Reply With Quote
Old January 24th, 2008, 13:38   #2
ArcticFox1984
 
ArcticFox1984's Avatar
 
Join Date: Feb 2007
Location: Toronto, Ontario
I am not sure there is a way to open up the G&P aimpoint... how did you get dirt inside the tube?

According to G&P it should be "High shockproof, weather proof & Fog Proof model, functions in bad climate and different situation" However if some orings around the windage/elevation adjustment knobs went missing I could potentially see condensation getting into it... but not dirt... that would take submersion into mud water I would think...

Anyway, you might be boned on this... mabey not, but looking at mine it seems that when G&P made these things, the idea was that they won't come apart no matter what you do.

Replacement = 34.98USD

http://cgi.ebay.ca/G-P-30mm-Aimpoint...QQcmdZViewItem
ArcticFox1984 is offline   Reply With Quote
Old January 24th, 2008, 13:42   #3
Danke
 
Danke's Avatar
 
Join Date: Oct 2007
Location: Danger Zone
I would guess it's unsightly but not something you'll focus on when you're engaging a target. Best to leave as is.
Danke is offline   Reply With Quote
Old January 24th, 2008, 22:31   #4
Kos-Mos
 
Kos-Mos's Avatar
 
Join Date: Nov 2005
Location: LĂ©vis (QC)
I don't know how you got dust in there, but I know that if you open it, there will be some fogging problems. There is some water vapors in the "normal" air, so when you will re-close it, there will be moist trapped inside.

I think that you can unscrew the front lense. Similar to some other scopes or binoculars. I am not sure about it though.
Kos-Mos is offline   Reply With Quote
Old January 24th, 2008, 22:49   #5
Ronan
Official Crybaby Chairsofter
 
Join Date: Jun 2007
Location: Montreal, QC
If you manage to contaminate your red dot you have 2 options. Leave it or change it. Opening it can ONLY make it worst.
__________________
Quote:
Originally Posted by Mr.Shiney View Post
Yes it is hard to find an Instructor that teaches how to Finger, Suck, Squeeze and Blow all at the same time.
Ronan is offline   Reply With Quote
Old January 24th, 2008, 23:00   #6
Ibby
 
Ibby's Avatar
 
Join Date: Aug 2003
Location: Victoria/Kingston
Send a message via ICQ to Ibby
Take it to a photography shop, a place that sells and services cameras. They may be able to fix it for you. It involves cleaning out the inside, filling it with (usually) nitrogen and resealing it properly. This is how scope, binoculars etc. are serviced. Dunno the cost, it may wind up being cheaper to replace it.
__________________
"Anyone with a name like Amanishourbariki should give a few letters to the poor Ng family." - Snarfangel, Fark.com
Ibby is offline   Reply With Quote
Old January 25th, 2008, 22:48   #7
Solizone
 
Join Date: Jan 2007
Thanks guys. I think i'll just leave it alone for now. I probably will take it somewhere (photography shop?) where they could open it up. I don't know how either, but There are clearly some dusts and several dark specs that I can't wipe off from the outside.
Solizone is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 09:41.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.