|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 16th, 2008, 16:39 | #1 |
Kraken AK47 Problem
So I took my Kraken AK and installed a Systema Turbo motor in it.. the blue one. And after the 9.6V 4200MAH was plugged in we decided to test out the hicap.. It worked up untill it sounded like a dremel on high speed. Can 40 rounds per second do that to an AEG??
|
|
January 16th, 2008, 16:41 | #2 |
Official ASC Bladesmith
|
Geez, that's not rate of fire, that's rate of eating itself!
|
January 16th, 2008, 16:42 | #3 |
At least the buyairsoft.ca Hicaps can keep up!
|
|
January 16th, 2008, 16:56 | #4 |
so did you open it up and look at the gears?
take some pics plz. |
|
January 16th, 2008, 16:57 | #5 |
Official ASC Bladesmith
|
They must have, I was just told his piston just sheared it's teeth. Lol
|
January 16th, 2008, 17:05 | #6 |
Holy shit limit posted!!!!!
|
|
January 16th, 2008, 17:15 | #7 |
Lol.
Please open it up and take pictures I'm interested to see what happened. |
|
January 16th, 2008, 17:19 | #8 |
January 16th, 2008, 17:39 | #9 | |
Official ASC Bladesmith
|
Quote:
http://www.airsoftcanada.com/showthr...ighlight=torch |
|
January 16th, 2008, 21:32 | #10 |
two teeth eaten, getting a deep fire full titanium tooth piston, swapping the XYT gears for my spare HurricanE highspeed gears, metal bushings, and bearing spring guide. See how long it lasts with that setup...its my experimental gun, have a TM M14 and PTW CQB-R for reliable gaming guns. |
|
January 16th, 2008, 21:47 | #11 |
Official ASC Bladesmith
|
I'll get you one of those pistons in next month unless you want to order yourself.
Jesus, the inside of the mechbox looks like an Alien birth chamber! |
January 16th, 2008, 22:01 | #12 |
Yeah, I counted at least three different colours/thicknesses of grease, cleaning it all out and replacing it all with your favorite graphite lube.
As for the piston, already ordered one and metal bushings from airsoftparts.ca, should be here early next week (Quantis wanted a bunch of PTW stuff from airsoftparts.ca too so we just went there.) |
|
January 16th, 2008, 22:03 | #13 |
Official ASC Bladesmith
|
Works for me. I have always tried to make you fuckwits more independant instead of running to me all the time. The only use for me now you guys should have is cheaper prices from airsoftparts.ca than if you ordered yourselves. Even cheaper if you became an Ottawa Airsoft Parts & Services member.
Last edited by CDN_Stalker; January 16th, 2008 at 22:14.. |
January 16th, 2008, 22:11 | #14 | |
Quote:
Yeah, that's not bad damage considering you pretty much did the equivalent of dropping a Porsche engine in a Firefly and took it out on the Autobahn for a full speed run. lol But I'm sure with good gears, bushings, a new piston, and a cleanup and proper lube of the mechbox, you'll have your BB hose up and running again in no time.
__________________
Last edited by Crunchmeister; January 16th, 2008 at 22:13.. |
||
April 10th, 2009, 22:28 | #15 |
The exact same thing happened to me. I wasn't really sure about what the problem was, but now I know. I'd just get the insides torn out and replaced with better ones.
|
|
|
Bookmarks |
Thread Tools | |
|
|