|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
December 2nd, 2007, 13:03 | #1 |
WE Hight capa help
Ok, my high capa no longer fires when I put the mag in the gun it just releases all the gas, and I have no clue. Earlier when I let some one borrow it they try'd loading the gas in the mag while it was in the gun I yelled at them to not but figures they continued till they had to yell it doesn't work.....and I'm pissed. Any clue whats wrong?
|
|
December 2nd, 2007, 13:08 | #2 |
Official ASC Bladesmith
|
Put oil in around the firing pin (that links the hammer to the mag's release valve) and cycle it a dozen or so times. Sounds like the firing pin is sticking, causing it to not retract when the slide cycles. VERY common problem among GBBs, more so those that don't get much maintainance.
|
December 2nd, 2007, 13:20 | #3 |
Wait so where the hammer is theres a little hole in the back there and in front of that what does the pin really look like sorry I haven't taken this apart before or anything.
|
|
December 2nd, 2007, 17:30 | #4 |
Official ASC Bladesmith
|
You have to take the slide off and work the action (cock hammer, pull trigger, let hammer hit finger) and watch for the part that moves forward into the magwell, then oil around that in where the hammer assembly is.
|
|
Bookmarks |
Thread Tools | |
|
|