September 5th, 2007, 22:28 | #1 |
3300mAh or 1500mAh?
with the choice, which one holds more? i'm guessing its the 3300mAh, but i just want to make sure
|
|
September 5th, 2007, 22:33 | #2 |
A Total Bastard
|
Higher number would be the correct, it will have lnger life and punch out a bit more strength.
__________________
W1-5 |
September 5th, 2007, 22:37 | #3 |
Official ASC Bladesmith
|
Get the highest mAh you can fit in your gun. Higher rate of fire, higher ability to run upgrades well, and longer game life.
|
September 5th, 2007, 23:58 | #4 |
thanks, i'm thinking of buying this puppy: http://cgi.ebay.com/G-P-AN-PEQ-2-RIS...QQcmdZViewItem
however, i'm just wondering if i will have to mod my gun for the battery to plug in... or are all the connectors universal? |
|
September 6th, 2007, 00:16 | #5 |
Connectors are NOT universal. That PEQ has a female mini tamiya. If you're using this on an M4 then its fine as every M4 I've ever seen has a male mini tamiya in the handguard. There are dozens of connector types out there but the most common in airsoft are mini tamiya, large tamiya, and the best choice deans connectors.
|
|
September 6th, 2007, 00:21 | #6 |
ok, thanks, i do have an M4, but just in case it doesnt have the right connector, is there an easy way of modding it so that it will work?
|
|
September 6th, 2007, 00:45 | #7 |
Vicious MSPaint Wizard
|
Chop, solder, done.
|
September 6th, 2007, 02:00 | #8 |
You sure you want a 10.8V battery? If your gun is stock, that battery will eat your motor/internals for breakfast.
|
|
September 6th, 2007, 04:07 | #9 |
GBB Whisperer
|
... and for lunch and dinner, too.
|
September 6th, 2007, 09:59 | #10 |
Official ASC Bladesmith
|
And a couple midnight snacks.
|
September 6th, 2007, 10:46 | #11 |
Yes the voltage is to hight for your M4!! Should get a 8,4v
|
|
September 6th, 2007, 17:36 | #12 |
i'm also buying a new motor and spring, any suggestions on what kind of motor to get?
|
|
September 6th, 2007, 17:48 | #13 |
GBB Whisperer
|
if you want just a slight boost in rpm and torque, then just get an eagle force 1300L.
If you don't want a boost, but just want a quality motor, then get the 1100L. If you're looking for extreme performance at one end of the spectrum, get the Systema Magnum for high torque applications or the Systema Turbo for high ROF applications. |
September 6th, 2007, 17:48 | #14 |
Did you not just hear what we said?
|
|
September 6th, 2007, 18:29 | #15 |
|
Bookmarks |
Thread Tools | |
|
|