TM MP5 busted

Grand Newbien · November 9th, 2006, 20:29

Sorry for the post guys, was quite a bit younger at that time

Aquamarine · November 9th, 2006, 20:45

The front end of the barrel falls off infront of you??? Or do the bb's roll out of the barrel?

Fucked up piston by the sounds of it (only by what happened to my G3-SG1 before)

CDN_Stalker · November 9th, 2006, 20:45

Sounds like the hop up lever got shifted to zero hop up. BBs will roll out of the barrel then even when you don't shoot, and you won't get much range at all out of it when you do shoot.

Grand Newbien · November 9th, 2006, 21:19

idiot question

aZn_triXta07 · November 9th, 2006, 21:31

Send me some pictures of your hop up. And if you take it apart send some pics as well and I can give you some help. Do you hear an whining noise?

CDN_Stalker · November 9th, 2006, 21:33

Your piston is invisible, no wonder it's causing you a lot of problems.

Post a pic of your piston, let's see. Unless something is obviously broken on it, chances are it's fine.

brently0725 · November 9th, 2006, 22:09

My guess would be the tappet plate or the tappet spring broke causing the air nozzel to allow the bb's to roll thru freely. Or the little round piece of rubber fell out from underneth the hop up rubber also allowing the bb's to roll out the barrel as well!!

CDN_Stalker · November 9th, 2006, 22:22

If the tappet plate broke, the spring would hold it full forward, preventing BBs from entering the barrel. And tappet springs don't break, *might* have slipped off the little post on the mechbox though, but it really wouldn't shoot at all, the tappet would stay full rear and BBs would just pour through the barrel no matter what.

I think it best for the original poster to clarify a lot of things for us before we continue to reply. His descriptions are extremely vague.

Greylocks · November 10th, 2006, 08:13

You are 13 and your brother forces you to do things at gunpoint? Why would we want to have this gun fixed? He does not sound responsible enough to me.

How old is he?

Grand Newbien · November 10th, 2006, 23:33

idiot Question

Greylocks · November 11th, 2006, 09:02

I think you should read the Newbie Guide, and the Information section about the laws related to airsoft, real soon.

Same for your brother.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

November 9th, 2006, 20:29	#1
Grand Newbien Trader rating Join Date: Nov 2006 Location: Brampton, ON	TM MP5 busted Sorry for the post guys, was quite a bit younger at that time Last edited by Grand Newbien; May 5th, 2010 at 17:29..

November 9th, 2006, 20:45	#2
Aquamarine PanSexual Trader rating Join Date: Oct 2002 Location: Asakusa, Japan	The front end of the barrel falls off infront of you??? Or do the bb's roll out of the barrel? Fucked up piston by the sounds of it (only by what happened to my G3-SG1 before) __________________

November 9th, 2006, 20:45	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Sounds like the hop up lever got shifted to zero hop up. BBs will roll out of the barrel then even when you don't shoot, and you won't get much range at all out of it when you do shoot. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 9th, 2006, 21:19	#4
Grand Newbien Trader rating Join Date: Nov 2006 Location: Brampton, ON	idiot question Last edited by Grand Newbien; May 5th, 2010 at 17:28.. Reason: age

November 9th, 2006, 21:31	#5
aZn_triXta07 Trader rating Join Date: Nov 2005 Location: Toronto, Ontario	Send me some pictures of your hop up. And if you take it apart send some pics as well and I can give you some help. Do you hear an whining noise?

November 9th, 2006, 21:33	#6
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Your piston is invisible, no wonder it's causing you a lot of problems. Post a pic of your piston, let's see. Unless something is obviously broken on it, chances are it's fine. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 9th, 2006, 22:09	#7
brently0725 Trader rating Join Date: Apr 2006 Location: Mission, BC	My guess would be the tappet plate or the tappet spring broke causing the air nozzel to allow the bb's to roll thru freely. Or the little round piece of rubber fell out from underneth the hop up rubber also allowing the bb's to roll out the barrel as well!! __________________ -TM AK Beta Spetz -TM MP5 SD5 -TSD VSR10 -Ares G39C -A&K Tan Magpul Masad -We Tech M9 Tac Masterling -1Tornado Impacts V2/3 Gun Doc and BA experience

November 9th, 2006, 22:22	#8
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	If the tappet plate broke, the spring would hold it full forward, preventing BBs from entering the barrel. And tappet springs don't break, might have slipped off the little post on the mechbox though, but it really wouldn't shoot at all, the tappet would stay full rear and BBs would just pour through the barrel no matter what. I think it best for the original poster to clarify a lot of things for us before we continue to reply. His descriptions are extremely vague. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

November 10th, 2006, 08:13	#9
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	You are 13 and your brother forces you to do things at gunpoint? Why would we want to have this gun fixed? He does not sound responsible enough to me. How old is he?

November 10th, 2006, 23:33	#10
Grand Newbien Trader rating Join Date: Nov 2006 Location: Brampton, ON	idiot Question Last edited by Grand Newbien; May 5th, 2010 at 17:28.. Reason: Age

November 11th, 2006, 09:02	#11
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	I think you should read the Newbie Guide, and the Information section about the laws related to airsoft, real soon. Same for your brother.

TM MP5 busted

Doctor's Corner