Airsoft Canada
https://www.replicaairguns.ca/airsoft

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Outer Barrel Destroying my Metal Slide + Loading Nozzle Assembly!

:

Doctor's Corner

Reply
 
Thread Tools
Old October 1st, 2006, 23:09   #1
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
Outer Barrel Destroying my Metal Slide + Loading Nozzle Assembly!

I have a Creation Metal Slide + Outer Barrel for my Tokyo Marui Hi-Capa 4.3.
However just this weekend, I bought a Guarder Stainless Outer Barrel. So I swaped out the creation outer barrel.

I fitted the stainless outer barrel in to my creation metal slide and it seems like the slide gets stuck with the barrel.
The Outer Barrel doesnt seem to fit properly sometimes.

Outer Barrel.
http://i107.photobucket.com/albums/m...0/DSC00475.jpg

Here are the damanges that the Outer Barrel caused on the metal slide...
http://i107.photobucket.com/albums/m...0/DSC00477.jpg
http://i107.photobucket.com/albums/m...0/DSC00476.jpg
http://i107.photobucket.com/albums/m...0/DSC00471.jpg
http://i107.photobucket.com/albums/m...0/DSC00472.jpg

You can see where the outer barrel has cutted/rashed up the inside of the metal slide.

Do I have to file down the stainless outer barrel to make it fit in the metal slide?
Will the barrel ruin my metal slide's functionality?

All positive and useful input is greatly appreciated!

Thanks in Advance!
Identity is offline   Reply With Quote
Old October 1st, 2006, 23:21   #2
Lakonian
kos
 
Lakonian's Avatar
 
Join Date: Feb 2006
Location: Wherever.
oh man! sorry to hear that! I hate guarder parts; They're 70% lemons.
Lakonian is offline   Reply With Quote
Old October 2nd, 2006, 03:26   #3
Ph0_Eat3r
 
Ph0_Eat3r's Avatar
 
Join Date: Oct 2005
Location: toronto
Send a message via MSN to Ph0_Eat3r
well look for some of those contact points and then just sand them down or file i think you would get more control with sandpaper though
Ph0_Eat3r is offline   Reply With Quote
Old October 2nd, 2006, 03:56   #4
Jugglez
 
Join Date: Feb 2005
Location: Swimming in a pool of Xpresspost receipts.... Toronto - 400/401
Don't touch the barrel. Just lightly work in those contact points on the inside of the slide with a file/dremel/sandpaper/etc.. Don't over-do it or the barrel is going to wobble.

This is normal when mixing metal parts from different brands.
__________________
Jugglez is offline   Reply With Quote
Old October 2nd, 2006, 04:05   #5
MadMax
Delierious Designer of Dastardly Detonations
 
MadMax's Avatar
 
Join Date: Dec 2001
Location: in the dark recesses of some metal chip filled machine shop
For some reason I can't seem to view your pics (very slow load), but I'm guessing that you're noticing some damage to the chamber cover opening area. I know of two other Hicapas with this issue and have noted that my own hicapa is getting worse around there (3 total now)

Strange thing is that my own hicapa is still shooting the plastic barrel. Instead of the slide being damaged, the plastic barrel is losing the fight. I'm not sure what is to blame as I am shooting a PGC Kimber slide. I have a feeling that slide manufacturers may have missed some important features in the TM slide design. I'm taking a closer look, but haven't found any differences yet.

In the meantime, I have found it helped to bevel the top front and rear edges of the chamber cover (pics to follow) to reduce binding when the slide returns to battery.
__________________
Want nearly free GBB gas?

MadMax is offline   Reply With Quote
Old October 2nd, 2006, 10:35   #6
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
Quote:
Originally Posted by Jugglez
Don't touch the barrel. Just lightly work in those contact points on the inside of the slide with a file/dremel/sandpaper/etc.. Don't over-do it or the barrel is going to wobble.

This is normal when mixing metal parts from different brands.
The whole slide wobbles...
However, the barrel does not wobble much. I swaped back the barrel to the creation one and it seems to be a better fit. Where as the guarder part seems very rough on the gun...

One thing that I noticed with the Guarder Outer Barrel is that they have completely changed the design on how the hop-up + innerbarrel fits into the outer barrel.
Sometimes the whole outerbarrel can slide right off...
Where as the outer barrel from creation follows the Exact Toyko Marui Design.

I will post pictures after lunch.
Identity is offline   Reply With Quote
Old October 2nd, 2006, 12:27   #7
tsuru
 
tsuru's Avatar
 
Join Date: May 2004
Location: Winnipeg, MB
Quote:
Originally Posted by MadMax
Strange thing is that my own hicapa is still shooting the plastic barrel. Instead of the slide being damaged, the plastic barrel is losing the fight. I'm not sure what is to blame as I am shooting a PGC Kimber slide. I have a feeling that slide manufacturers may have missed some important features in the TM slide design. I'm taking a closer look, but haven't found any differences yet.
I'm having the exact same issue with my own plastic barrel and PGC Springfield Operator slide. The only apparent difference for me was that the butt end of the ejection port on the slide sticks out a bit more than the stock plastic slide thus causing the butt end of the barrel to suffer. I first noticed the paint beginning to flake off and now the plastic itself is beginning to chip. I'm getting a Guarder replacement for my 5.1 which will probably take the rest of the year for me to get right due to my lack of free time.
tsuru is offline   Reply With Quote
Old October 2nd, 2006, 13:59   #8
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
http://i107.photobucket.com/albums/m...0/DSC00480.jpg

Left : Guarder Right: Creation.

You can see how they changed the design of the fitting. I think thats the problem. I think I just wasted 40$...
Identity is offline   Reply With Quote
Old October 2nd, 2006, 14:49   #9
Drake
E-01
 
Drake's Avatar
 
Join Date: Dec 2001
Location: Montreal, QC
I don't remember the details offhand, but when I picked up a Guarder stainless steel chamber for my 1911 (WA), I remember there was some note about how I might have to trim the inside of the slide around the ejection port (opposite end of where you're having trouble from what I gathered from the pics -- but different guns so maybe the HiCapa one has trouble at the rear).

I didn't have to trim mine but I'm still using the stock (ABS) slide since I cant find a metal counterpart/suitable alternative for my gun.
__________________
Drake is offline   Reply With Quote
Old October 2nd, 2006, 18:36   #10
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
I don't wanna sand down the metal slide because if I do it wrong I don't wanna damage my metal slide... I don't have enough money to get another slide!
I think I should have got the NINE BALL Stainless Outer Barrel. Guarder sucks!
Identity is offline   Reply With Quote
Old October 2nd, 2006, 18:55   #11
Mantelope
Scotty aka harleyb
 
Mantelope's Avatar
 
Join Date: Mar 2004
Location: Toronto, Ontario
Send a message via AIM to Mantelope Send a message via MSN to Mantelope
Quote:
Originally Posted by Identity
Guarder sucks!
You're an idiot.
__________________
Mantelope is offline   Reply With Quote
Old October 2nd, 2006, 19:26   #12
Ph0_Eat3r
 
Ph0_Eat3r's Avatar
 
Join Date: Oct 2005
Location: toronto
Send a message via MSN to Ph0_Eat3r
Quote:
Originally Posted by Identity
I don't wanna sand down the metal slide because if I do it wrong I don't wanna damage my metal slide... I don't have enough money to get another slide!
I think I should have got the NINE BALL Stainless Outer Barrel. Guarder sucks!

i know how you feel, but if you want to have that full metal 4.3 look your gona have to sand it. The inside of my metal slide is practicaly silver because i sanded it in so many places to make my outer barrel fit properly for my 5.1
Ph0_Eat3r is offline   Reply With Quote
Old October 2nd, 2006, 21:30   #13
Identity
Banned
 
Join Date: Aug 2003
Location: Markham, Toronto
Quote:
Originally Posted by Ph0_Eat3r
Quote:
Originally Posted by Identity
I don't wanna sand down the metal slide because if I do it wrong I don't wanna damage my metal slide... I don't have enough money to get another slide!
I think I should have got the NINE BALL Stainless Outer Barrel. Guarder sucks!

i know how you feel, but if you want to have that full metal 4.3 look your gona have to sand it. The inside of my metal slide is practicaly silver because i sanded it in so many places to make my outer barrel fit properly for my 5.1
I don't wanna sand it so much that I have a barrel wobble =\...
Should I just go buy a NINE BALL Stainless Outer Barrel instead?
Identity is offline   Reply With Quote
Old October 2nd, 2006, 21:51   #14
Ph0_Eat3r
 
Ph0_Eat3r's Avatar
 
Join Date: Oct 2005
Location: toronto
Send a message via MSN to Ph0_Eat3r
thats why you should sand it slowly and check it each time you sand a bit, it might be alot of work but worth in the end

IF YOU REALLLLLLLLYYYY want to not sand your slide at all then i duno about the nineball i think most outer barrels require some sort of sanding somewhere
Ph0_Eat3r is offline   Reply With Quote
Old October 3rd, 2006, 02:43   #15
MMMiles!
Part man, part machine
 
MMMiles!'s Avatar
 
Join Date: Dec 2001
Location: Toronto, Ontario
Quote:
Originally Posted by kos
oh man! sorry to hear that! I hate guarder parts; They're 70% lemons.
Quote:
Originally Posted by Identity
Guarder sucks!
Don't make comments about manufacturers when you have no idea what you're talking about. We've handled possibly 1000's of Guarder parts and I wouldn't say any are "lemons" - they make literally 100's of fantastic products, but sometimes a design can be just plain bad from any manufacturer.

There is what appears to be a manufacturing or design error with the Hicapa barrels from Guarder, or at least their compatibility with metal slides, but tsuru's comment about having this issue with a plastic barrel + metal slide makes it sound like there is a finer problem to look at.


We found the Guarder hicapa outer barrels are really not compatible with PGC metal slides, and I guess we can add Creation to that list: without some kind of modification or more information, I would not recommend them except for show.

Their metal outer barrels for all other guns we've tried (226, Glock 17/19/26) work just fine (although when you mix and match aftermarket parts, you can never guarantee they'll work perfectly without a little elbow grease).
MMMiles! is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
https://www.replicaairguns.ca/airsoft

All times are GMT -4. The time now is 19:05.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.