My ICS AK 74M

Dallas · August 8th, 2006, 04:00

Hi i jsut got my ICS AK 74M and the screw holding the grip covering the moter was loose but i didn't notice it. The screw is long gone, so i took one from were the stock is held on because it seemed to be ok with jsut one since the stock snaps in. after i screwed that in it and hook the battery back up and shoot. the thing makes a wired noise and just stops. so i took the motor mount apart and the motor looks ok but there is a tiny plate that falls out and i soon find that the onld screw holding the grip over the moter had been stripped right off and i had screwed the stripped piece right up and this is what i beleive happened since there were scratch marks on the little plate. so then i soon find that i have blown a fuse, i thought my motor was fried can any one explain this to me? Thanx. O, and i am using a 8.4 3600mah battery, and it has a 30A 250V fuse in it.

666 · August 8th, 2006, 09:06

You probably pushed motor adjustement screw all the way up into the mechbox and jammed the thing. Replace the fuse, disconnect motor from the mechbox and pull the trigger. If motor works fine, put it back, get proper allen key, readjust the motor and hope that bevel gear in your mechbox is still intact.
Or you can just take it to a gun doctor to be on the safe side.

Dallas · August 9th, 2006, 01:48

thanx alot i just put a new fuse and took the stripped screw out its working really good now.

Dallas · August 10th, 2006, 23:18

also the vibration from the gun seems to move the fire selector switch down from full auto to semi i've titened the screw as much as i can and it still dose it is there anything i can do to prevent this?? thanx in advance.

Renegade) · August 10th, 2006, 23:36

Might be something lose inside or a spring not connected properly. Try to look inside without opening it if you can.

Dallas · August 11th, 2006, 02:28

I came up with a quick fix there was a spacer on the screw to keep the screw from going in to far so i took that off and titened it jsut a little more not to much tho. Also where is the best place to buy airsoft guns I got mine from 007 airsoft and the he isn't all that great my tlp charger c ame with out the 110V adapter and the mini plug converstion cable.thax in advance.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 8th, 2006, 04:00	#1
Dallas Trader rating Join Date: Mar 2006 Location: Weyburn Sask	My ICS AK 74M Hi i jsut got my ICS AK 74M and the screw holding the grip covering the moter was loose but i didn't notice it. The screw is long gone, so i took one from were the stock is held on because it seemed to be ok with jsut one since the stock snaps in. after i screwed that in it and hook the battery back up and shoot. the thing makes a wired noise and just stops. so i took the motor mount apart and the motor looks ok but there is a tiny plate that falls out and i soon find that the onld screw holding the grip over the moter had been stripped right off and i had screwed the stripped piece right up and this is what i beleive happened since there were scratch marks on the little plate. so then i soon find that i have blown a fuse, i thought my motor was fried can any one explain this to me? Thanx. O, and i am using a 8.4 3600mah battery, and it has a 30A 250V fuse in it.

August 8th, 2006, 09:06	#2
666 Trader rating Join Date: Jul 2004 Location: Toronto, Ontario	You probably pushed motor adjustement screw all the way up into the mechbox and jammed the thing. Replace the fuse, disconnect motor from the mechbox and pull the trigger. If motor works fine, put it back, get proper allen key, readjust the motor and hope that bevel gear in your mechbox is still intact. Or you can just take it to a gun doctor to be on the safe side. __________________ Op Woodsman. Biggest WW2 event in Ontario.

August 10th, 2006, 23:36	#5
Renegade) A Total Bastard Trader rating Join Date: Apr 2006 Location: Tottenham, Ontario	Might be something lose inside or a spring not connected properly. Try to look inside without opening it if you can. __________________ W1-5

August 9th, 2006, 01:48	#3
Dallas Trader rating Join Date: Mar 2006 Location: Weyburn Sask	thanx alot i just put a new fuse and took the stripped screw out its working really good now.

August 10th, 2006, 23:18	#4
Dallas Trader rating Join Date: Mar 2006 Location: Weyburn Sask	also the vibration from the gun seems to move the fire selector switch down from full auto to semi i've titened the screw as much as i can and it still dose it is there anything i can do to prevent this?? thanx in advance.

August 11th, 2006, 02:28	#6
Dallas Trader rating Join Date: Mar 2006 Location: Weyburn Sask	I came up with a quick fix there was a spacer on the screw to keep the screw from going in to far so i took that off and titened it jsut a little more not to much tho. Also where is the best place to buy airsoft guns I got mine from 007 airsoft and the he isn't all that great my tlp charger c ame with out the 110V adapter and the mini plug converstion cable.thax in advance.

My ICS AK 74M

Doctor's Corner