Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

Maruzen MP5K expelling gas

:

Doctor's Corner

Reply
 
Thread Tools
Old July 16th, 2006, 20:48   #1
jerryliang2k
 
jerryliang2k's Avatar
 
Join Date: Oct 2004
Location: Mississauga, ON
Send a message via MSN to jerryliang2k
Maruzen MP5K expelling gas

I just got a used maruzen MP5K gbb in a trade not long ago. I finally got a chance to fill it up and take a few shots with it today but when I pulled the trigger on semi-auto mode, all the gas just shot out of the barrel leaving a very cool spray of gas and the BB flying at incredible speeds (went through two sides of a pop can at 7 meters). I tried again and the same thing happened on full auto.

Now, the guy i made the trade with said the gun was in perfect working order so obviously this shouldn't happen. I'm not sure what the problem is, but if it's small I'll probably just keep the gun and fix it but if it's big I may have to contact the other trader...

Anyways, any help would be appreciated. I hear the MP5K supposedly shares the same mechanism as the Maruzen M11a1. So if anyone has had a similar problem with the M11, please throw in your two cents as well.

Zi-Xiao
__________________
Primary
- CA M249
- Systema PTW

Sidearms
- KWA G18c
- WE 1911
jerryliang2k is offline   Reply With Quote
Old July 16th, 2006, 22:13   #2
Droc
Guest
i dont know much on gas guns, but I assume your using propane?
the 1st rule with gas guns is to lube them up. since its a new gun to you, give it a good lubing. sometimes things tend to stick when they get dry.
  Reply With Quote
Old July 16th, 2006, 22:14   #3
Autumn
 
Autumn's Avatar
 
Join Date: Jun 2006
Location: Coquitlam
Send a message via MSN to Autumn
I know this can happen if the valve on the mag gets stuck open. Check to see if its sticky, if so give it some silicon.

The piece that strikes the valve could also be getting stuck, unfortunetly I don't know enough about the gun to help you if thats the case.
Autumn is offline   Reply With Quote
Old March 5th, 2009, 18:45   #4
RangerXML
 
Join Date: Mar 2009
Send a message via MSN to RangerXML
I got something similar, except that I have one mag that it doesn't do it with and two it does. I got this gun used off fleebay (eBay) and I though it was a good deal, a lot of fun to play with and it shot fine (modded it for Green Gas and 6.04 barrel). Got 2 50 rd mags, both had the gas expel problem you mentioned.

I don't know the technical terminology of the mags, but the top metal piece of the mag on all three looks identical. I have a friend who is a metal worker who offered to make me new ones since though that might be the issue. I, for grins removed the piece from the working mag and put it on a 50 rd mag and now the 50 works, I put the other one on the standard mag and now it has the expel issue. Good news I have a working 50 rd mag, should be good for small engagements; bad news I spend $100 on paper weights and prop mags.

Anyone have any suggestions?
RangerXML is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 19:54.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.