KWA G19 Not firing

JamesBond_007 · January 31st, 2006, 15:17

My KWA G19 isn't firing when I pull the trigger. The hammer seems to be hitting correctly but there's no gas coming out to cycle the gun or fire a shot. Every now and then I'll get a little 'pop' noise but nothing major. The mag is filled, correctly as well as it's not my first gun, but still nothing. I'm not sure what could be the problem. If anyone has any ideas help would be great. Thanks in advance.

WhatTheWho · January 31st, 2006, 15:31

Remove the slide from your gun and inspect part#78. Pull the trigger and ease the hammer down. Part#78 it should protude out front the hammer assembly to hit the flow valve on the magazine. (Don't leave the magazine while you do this)

CDN_Stalker · January 31st, 2006, 15:32

Sounds like some oil is required.

v82slo · January 31st, 2006, 16:24

Try the easy stuff first, but I had the same problem when part # 87 (hammer lockback) on my G19 broke. The hammer wouldn't lock all the way back (worked half way) and as a result the spring wasn't compressed enough to put pressure on the gas valve.

Try some lube and then start looking for broken pieces in the firing mechanism.

JamesBond_007 · January 31st, 2006, 21:29

I got it to fire, sort of. There was a screw loose in the back underside of the slide which I tightned and now it shoots. Only trouble is it will fire and the mag keeps releasing gas. Any thoughts?

Greylocks · January 31st, 2006, 21:55

This may be a stupid question, but exactly HOW do you put the gas in the magazine? Did you read the information on how to do that? Not enough gas, or a bad method, would explain your problem.

JamesBond_007 · February 1st, 2006, 00:00

Mag and Propane upside down, press in until it sprays out. Then wait until it's room temprature. As far as I know I've been doing it right. It's worked on my other guns anyway.

WhatTheWho · February 1st, 2006, 02:11

Quote:

Originally Posted by JamesBond_007

I got it to fire, sort of. There was a screw loose in the back underside of the slide which I tightned and now it shoots. Only trouble is it will fire and the mag keeps releasing gas. Any thoughts?

By "keeps releasing gas" do you mean that you fire off just one shot and the magazine vents the gas?

And just a quick question; have you ever disassembled the blowback mechanism before?

JamesBond_007 · February 1st, 2006, 07:16

It vents all the gas in the sense that when I fire one shot it it will either, at a good pace vent all the gas after a shot, vent all the gas in a second or so, or not do anything.

About disassembling the blowback, I never have but I'm sure I could if I needed to.

JamesBond_007 · February 1st, 2006, 09:30

Something that my help with finding the problem is that when I fire the gun, there is a pop, followed by the slide coming back a cm of so and sticking. This and the venting gas happens every so often. Also, in the past I've noticed that sometimes the slide will cycle, but stick foreward, when I've finally managed to get it back again, the trigger isn't ready so the slide has to be cycled a few times to 'get the trigger back in line'. I say back in line because it almost seems as if the trigger moves slightly sideways. Thanks in advance guys!

flack · February 1st, 2006, 10:06

Quote:

Originally Posted by JamesBond_007

I got it to fire, sort of. There was a screw loose in the back underside of the slide which I tightned and now it shoots. Only trouble is it will fire and the mag keeps releasing gas. Any thoughts?

This screw get loose really fast!! every 2-3 mags on my G19... put some locktight on it cause one day youll get pwned during a game... :mrgreen:

CDN_Stalker · February 1st, 2006, 10:24

You need to put oil in and around where the hammer is and in front of the hammer. Lots of moving parts in there that need regular lubing. The part that the hammer presses forward to the mag release valve is sticking. Remove the slide, put your mag in and take a look. Because that part sticks, it releases all the gas on the first shot. Common problem, seen it myself (where do you think I leanred about it?) and quite a few people have had the same problem on here, I tell them the info, they do it, fixed.

WhatTheWho · February 1st, 2006, 10:54

There's only a few things which can cause your slide to stick; either something is jamming your slide, or your blowback chamber assembly is messed.

First, solve the issue with the screw holding the blowback chamber to the slide. Tighten, or throw some locktite on it.

You should test if the hammer assembly is actually functioning properly so you can isolate the problem, as there seems to be a number of them with yours.

Just cock the hammer manually with the slide off, and pull the trigger. Ease the hammer down as to not let it smash into the hammer assembly frame.

And if you could, disassemble the blowback chamber for a quick check of the rocket valve and piston. Either one being misaligned can mess with your blowback.

Also, what recoil rod would you be using? Stock or upgraded?

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

January 31st, 2006, 15:17	#1
JamesBond_007 Trader rating Join Date: Aug 2003 Location: St.John's, Newfoundland	KWA G19 Not firing My KWA G19 isn't firing when I pull the trigger. The hammer seems to be hitting correctly but there's no gas coming out to cycle the gun or fire a shot. Every now and then I'll get a little 'pop' noise but nothing major. The mag is filled, correctly as well as it's not my first gun, but still nothing. I'm not sure what could be the problem. If anyone has any ideas help would be great. Thanks in advance. __________________ Old Buy/Sell Ratings

January 31st, 2006, 15:31	#2
WhatTheWho Trader rating Join Date: Dec 2002 Location: Edmonton, AB	Remove the slide from your gun and inspect part#78. Pull the trigger and ease the hammer down. Part#78 it should protude out front the hammer assembly to hit the flow valve on the magazine. (Don't leave the magazine while you do this) __________________ "The greatest pleasure in life is doing what people say you cannot do."

January 31st, 2006, 15:32	#3
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	Sounds like some oil is required. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

January 31st, 2006, 16:24	#4
v82slo Trader rating Join Date: Aug 2003	Try the easy stuff first, but I had the same problem when part # 87 (hammer lockback) on my G19 broke. The hammer wouldn't lock all the way back (worked half way) and as a result the spring wasn't compressed enough to put pressure on the gas valve. Try some lube and then start looking for broken pieces in the firing mechanism. __________________

January 31st, 2006, 21:29	#5
JamesBond_007 Trader rating Join Date: Aug 2003 Location: St.John's, Newfoundland	I got it to fire, sort of. There was a screw loose in the back underside of the slide which I tightned and now it shoots. Only trouble is it will fire and the mag keeps releasing gas. Any thoughts? __________________ Old Buy/Sell Ratings

January 31st, 2006, 21:55	#6
Greylocks Trader rating Join Date: Dec 2001 Location: Gatineau, Quebec (Near Ottawa)	This may be a stupid question, but exactly HOW do you put the gas in the magazine? Did you read the information on how to do that? Not enough gas, or a bad method, would explain your problem.

February 1st, 2006, 00:00	#7
JamesBond_007 Trader rating Join Date: Aug 2003 Location: St.John's, Newfoundland	Mag and Propane upside down, press in until it sprays out. Then wait until it's room temprature. As far as I know I've been doing it right. It's worked on my other guns anyway. __________________ Old Buy/Sell Ratings

February 1st, 2006, 07:16	#9
JamesBond_007 Trader rating Join Date: Aug 2003 Location: St.John's, Newfoundland	It vents all the gas in the sense that when I fire one shot it it will either, at a good pace vent all the gas after a shot, vent all the gas in a second or so, or not do anything. About disassembling the blowback, I never have but I'm sure I could if I needed to. __________________ Old Buy/Sell Ratings

February 1st, 2006, 09:30	#10
JamesBond_007 Trader rating Join Date: Aug 2003 Location: St.John's, Newfoundland	Something that my help with finding the problem is that when I fire the gun, there is a pop, followed by the slide coming back a cm of so and sticking. This and the venting gas happens every so often. Also, in the past I've noticed that sometimes the slide will cycle, but stick foreward, when I've finally managed to get it back again, the trigger isn't ready so the slide has to be cycled a few times to 'get the trigger back in line'. I say back in line because it almost seems as if the trigger moves slightly sideways. Thanks in advance guys! __________________ Old Buy/Sell Ratings

February 1st, 2006, 10:24	#12
CDN_Stalker Official ASC Bladesmith Trader rating Join Date: Jul 2003 Location: Ottawa, Ont.	You need to put oil in and around where the hammer is and in front of the hammer. Lots of moving parts in there that need regular lubing. The part that the hammer presses forward to the mag release valve is sticking. Remove the slide, put your mag in and take a look. Because that part sticks, it releases all the gas on the first shot. Common problem, seen it myself (where do you think I leanred about it?) and quite a few people have had the same problem on here, I tell them the info, they do it, fixed. __________________ STKR Knives http://www.facebook.com/#!/pages/STK...17036668380871

February 1st, 2006, 10:54	#13
WhatTheWho Trader rating Join Date: Dec 2002 Location: Edmonton, AB	There's only a few things which can cause your slide to stick; either something is jamming your slide, or your blowback chamber assembly is messed. First, solve the issue with the screw holding the blowback chamber to the slide. Tighten, or throw some locktite on it. You should test if the hammer assembly is actually functioning properly so you can isolate the problem, as there seems to be a number of them with yours. Just cock the hammer manually with the slide off, and pull the trigger. Ease the hammer down as to not let it smash into the hammer assembly frame. And if you could, disassemble the blowback chamber for a quick check of the rocket valve and piston. Either one being misaligned can mess with your blowback. Also, what recoil rod would you be using? Stock or upgraded? __________________ "The greatest pleasure in life is doing what people say you cannot do."

KWA G19 Not firing

Doctor's Corner