|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
December 16th, 2015, 18:51 | #1 |
tm 5-7 not catching?
hi there guys, so i recently installed a creation 5-7 metal slide to my tm, and now when my slide locks back and i remove the magazine the slide just knock itself forward, did i do anything wrong? the gun seems to be functioning, any help would be great thanks!
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets |
|
December 16th, 2015, 19:29 | #2 |
"bb bukakke" KING!
|
Bottom of the inner slide should be flush with the outer and blowback unit. Also check tthe hammer assembly screws. Tgey should be snug dont overtighten them or youll strip the mounts in the frame
__________________
I futz with V2s, V3s and V6s. I could be wrong... but probably, most likely not, as far as I know. |
December 16th, 2015, 20:44 | #3 |
so i noticed that the innerslide is more outward than the rear assembly
but the hammer assembly screw is ok
__________________
What Doesn't Kill You Will Be Pumped Full Of Bullets |
|
|
Bookmarks |
Thread Tools | |
|
|