|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 8th, 2013, 18:09
|
#1 |
|
First A&K PTW Issue
so i was ziptie'n my cheapo flashlight to my rail cuz i'm cool like that and went to fire the rifle with the light on cuz i'm cool like that and it makes a loud screeching noise. no screech when cylinder removed (m110 spring NOT the factory m150)
A&K PTW 1st Issue - YouTube
__________________
WHISKEY-13 
|
|
|
|
June 8th, 2013, 18:30
|
#2 |
|
Crackers
|
Sounds like your piston might be toast.
take apart the cylinder and take a picture. |
|
|
|
|
June 8th, 2013, 18:34
|
#3 |
|
|
teeth dont look bad at all, could one of the gears have wiggled loose and become misaligned?
__________________
WHISKEY-13
Last edited by leth1337; June 8th, 2013 at 18:40.. |
|
|
|
|
June 8th, 2013, 19:38
|
#4 |
|
|
no idea what it could be, first "ptw"
__________________
WHISKEY-13
|
|
|
|
|
June 8th, 2013, 19:41
|
#5 |
|
aka coachster
|
Have you opened it entirely and inspected all moving parts?
|
|
|
|
|
June 8th, 2013, 19:45
|
#6 | ||
|
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Sounds like either piston (that you checked) or the sector gear (or whatever the pts temanology is for that)
On a side note i heard and seen there are full metal pistons for those. They are aluminum and they are swiss cheesed prety good to save weight.
__________________
Quote:
Quote:
FinchFieldAirsoft |
||
|
|
|
|
June 8th, 2013, 19:58
|
#7 |
|
I think your sector gear is not engaging the first tooth of the piston gear rack. If you have another cylinder, try that. Check to see if there is any wear on the first tooth of the piston. If the receiver fit isn't proper and the gear slips past the first tooth it VERY quickly wears it down (probably within one or two cycles) and will never engage again. I had a similar issue even on a PTW. Had to replace gear racks twice.
__________________
JG HK416 KWA USP |
|
|
|
|
|
June 8th, 2013, 20:07
|
#8 |
|
|
same sound with second cylinder. no noticeable wear on first or second tooth. is it possible the gear is getting locked against the piston and the noise is coming from the opposite direction?
__________________
WHISKEY-13
|
|
|
|
|
June 8th, 2013, 20:27
|
#9 |
|
If you can, check the pinion and bevel gears but this requires you know how to disassemble (and consequently) reassemble the lower. From your video it seems to cycle under no load fine so it's most likely something not engaging right when there's a load.
__________________
JG HK416 KWA USP |
|
|
|
|
|
June 8th, 2013, 20:29
|
#10 |
|
|
ya not sure how to do all that, i'll have to take it to my gun doc i suppose
__________________
WHISKEY-13
|
|
|
|
|
June 9th, 2013, 14:43
|
#11 | |
|
I have one fly through my workbench (yes I am retired), The issue was that the sector gear was turning THE WRONG WAY!
__________________
Do you know what ruins airsoft? (Chair), (Drama), (Air), (Sugar) softers, filthy casuals --- Quote:
WANTED PTW Receiver PRIME, STG, Factory |
|
|
|
|
|
June 9th, 2013, 15:13
|
#12 |
|
mrlexmark
|
Check your pinion gear! Last time i heard that, my pinion gear was loose on the motor.
|
|
|
|
|
June 9th, 2013, 16:00
|
#13 | |
|
Quote:
Or it is a lefthanded motor intead of a righthanded one. 
__________________
Age verifier Northern Alberta Democracy is two wolves and a sheep discussing what's for dinner. Freedom is the wolves limping away while the sheep reloads. Never confuse freedom with democracy. |
|
|
|
|
|
June 9th, 2013, 19:27
|
#14 | ||
|
|
Quote:
__________________
Do you know what ruins airsoft? (Chair), (Drama), (Air), (Sugar) softers, filthy casuals --- Quote:
WANTED PTW Receiver PRIME, STG, Factory |
||
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
