Mag not Filling

Kane · August 16th, 2005, 23:00

I have a brand new KJ P14 mag. When I go to fill it, the propane just comes shooting out of the gas release valve? It did work when I first got it, but this problem has just risen... and its not a issue with the second mag I have. Any thoughts one how to fill it? Lube?

Cheers, Brent

GMTII · August 17th, 2005, 00:06

Im not fimilar with the gun, but he problem sounds fimilar. I cant really explain how to fix it but it has something to do with a little swich that connects to the release valve. ...I think... try playing around with it a bit.

MadMax · August 17th, 2005, 00:11

There isn't a valve latch on KJ Para Ords (P14?)

To my knowledge, only the KJW USP has a valve latch on the mags.

Try twiddling with the valve a bit. Stand the tank on a table and fill the mag upright. Mess with the valve a bit while pressurizing the mag. Sometimes this helps seat the valve and get it to close.

Kane · August 17th, 2005, 00:41

Well... it worked the first time, went to fire it, let loose 10 or so rds, then the mag emptied itself. Can't to seem to fill it again anyway. Is it possible that I've been sold a defective mag??

Thanks

MadMax · August 17th, 2005, 00:43

maybe. Are you sure you have a KJW magazine?

IRC, the WA mags are compatible, but they have a latch mechanism which sits over the fire valve. Pull the plate down to release the valve before filling it.

The KJW mag does not require this feature. You should remove it altogether. All you have to do is unscrew the allen key there and take all the stuff off.

Kane · August 17th, 2005, 01:03

The valve must be fucked... I opened up the valve assembly and reinstalled it; it filled once, then nothing. Bullshit. I know AEGs inside out, and this is getting the better of me...

Well, the mag came in a KJ box...

Any other thoughts Madmax?

Grim Fandango · August 17th, 2005, 01:07

Try taking the valve out and soaking it in silicon oil for a while. That might help (unless you've already tried that and it didn't work).

Kane · August 17th, 2005, 01:08

PM sent grim

Kane · August 17th, 2005, 21:39

Anybody know how to actually remove the valve? It's not as simple as it seems, its flanked by two pieces of metal that are removeable.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

August 16th, 2005, 23:00	#1
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	Mag not Filling I have a brand new KJ P14 mag. When I go to fill it, the propane just comes shooting out of the gas release valve? It did work when I first got it, but this problem has just risen... and its not a issue with the second mag I have. Any thoughts one how to fill it? Lube? Cheers, Brent __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

August 17th, 2005, 00:06	#2
GMTII WW2 Airsofter Trader rating Join Date: Jun 2004	Im not fimilar with the gun, but he problem sounds fimilar. I cant really explain how to fix it but it has something to do with a little swich that connects to the release valve. ...I think... try playing around with it a bit. __________________ I can't measure my sig so I got this stupid tag line instead.

August 17th, 2005, 00:11	#3
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	There isn't a valve latch on KJ Para Ords (P14?) To my knowledge, only the KJW USP has a valve latch on the mags. Try twiddling with the valve a bit. Stand the tank on a table and fill the mag upright. Mess with the valve a bit while pressurizing the mag. Sometimes this helps seat the valve and get it to close. __________________ Want nearly free GBB gas?

August 17th, 2005, 00:41	#4
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	Well... it worked the first time, went to fire it, let loose 10 or so rds, then the mag emptied itself. Can't to seem to fill it again anyway. Is it possible that I've been sold a defective mag?? Thanks __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

August 17th, 2005, 00:43	#5
MadMax Delierious Designer of Dastardly Detonations Trader rating Join Date: Dec 2001 Location: in the dark recesses of some metal chip filled machine shop	maybe. Are you sure you have a KJW magazine? IRC, the WA mags are compatible, but they have a latch mechanism which sits over the fire valve. Pull the plate down to release the valve before filling it. The KJW mag does not require this feature. You should remove it altogether. All you have to do is unscrew the allen key there and take all the stuff off. __________________ Want nearly free GBB gas?

August 17th, 2005, 01:03	#6
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	The valve must be fucked... I opened up the valve assembly and reinstalled it; it filled once, then nothing. Bullshit. I know AEGs inside out, and this is getting the better of me... Well, the mag came in a KJ box... Any other thoughts Madmax? __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

August 17th, 2005, 01:07	#7
Grim Fandango Trader rating Join Date: Oct 2002 Location: Toronto, Ontario	Try taking the valve out and soaking it in silicon oil for a while. That might help (unless you've already tried that and it didn't work).

August 17th, 2005, 01:08	#8
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	PM sent grim __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

August 17th, 2005, 21:39	#9
Kane Trader rating Join Date: May 2002 Location: Salmon Arm, BC	Anybody know how to actually remove the valve? It's not as simple as it seems, its flanked by two pieces of metal that are removeable. __________________ “You hear the far-off crack of a rifle, your fate finally registering in your subconscious far too late as the white hot bullet penetrates your skull. Another round slams into the chamber even as your lifeless body falls to the ground…”---Unknown sniper “Invisible souls leave .308 holes.”----USMC Recon Sniper

Mag not Filling

Doctor's Corner