|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 27th, 2013, 22:00 | #1 |
TM No Hop Up=Roll out
Hello everyone I have a Tokyo Marui PX4
In a nut shell No Hop Up = BB rolling out I feel like the Hop Up is also working as a ball dentent Even when I pull the slide back to chamber a round sometimes it just pushes it right out the barrel Adding hop up isnt a big deal ..only need to turn it 1/4 of the way to fix it but Anyways its not a major issue but is there some way to fix this minor inconvenience has anyone else had this issue on any other gbb? Thank you Is this a Hop Up issue or a bucking issue ? Last edited by MatthewRyan; January 28th, 2013 at 00:07.. |
|
January 27th, 2013, 22:06 | #2 |
Try turning your hop up back on if its all the way off then yes your bbs will roll right out.
|
|
January 27th, 2013, 22:34 | #3 |
a.k.a. Greedy
|
Don't keep your PX4 in a nutshell.
|
January 27th, 2013, 22:57 | #4 |
Fainting Goat, Dictator of Quinte West
|
^ i lol at that
|
January 27th, 2013, 23:52 | #5 |
I also recommend not keeping your PX4 in a nutshell. It's dry in there, can dry out the seals.
If you have no hopup on, yes you might have BB's being pushed out. That's just a fact. |
|
January 28th, 2013, 00:13 | #6 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Use heavier bbs then youll need to use some hop up so the fly good.
What weighg of bbs ard u usein that u need ths hop up all the way off...
__________________
Quote:
FinchFieldAirsoft |
|
January 28th, 2013, 00:19 | #7 |
Im using .20s. I'd just figure that the gun can shoot without hop
|
|
January 28th, 2013, 00:45 | #8 | |
Quote:
Also you should be using at least 0.25's in GBB's if possible. |
||
January 28th, 2013, 00:58 | #9 |
Obviously .. I just though that the gun can shoot and chamber a bb without having any roll outs .
Note taken on the .25s I just play indoors for now but I will try a heavier bb |
|
January 28th, 2013, 01:20 | #10 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Even with 20 you will need some hop up to have a good long flight path. If the gun is newer it may have over hop at first till the rubber gets worked in. I figure if its a tm the fps is kinda low so 25 is prolly perfect i run 30 in my gbb but they shoot 400fps or so
__________________
Quote:
FinchFieldAirsoft |
|
January 28th, 2013, 13:42 | #11 |
Jesus what do you have that shoots 400? CO2 NBB pistols?
|
|
January 28th, 2013, 14:00 | #12 |
NAAZ's #1 fan!
|
You can change brand of bb. IIRC brands can vary from 5.95mm to 6.05mm. Find said 6.05ers and maybe they'll sit a little more snug.
|
January 28th, 2013, 14:06 | #13 | |
Oh we do hate you, just never felt like wasting the time to give you a user title :P
|
Kj m9 vertec 385fps green/propane and a gemtec oasis 410fps nbb propane.
Snipers need heafty pistols for those folks who get within 120 feet ghat its nlt safe to shoot em with the 515fps bolt action lol
__________________
Quote:
FinchFieldAirsoft |
|
January 28th, 2013, 15:04 | #14 |
That's a strangely high FPS for a propane mag in a KJ M9.
|
|
January 28th, 2013, 17:26 | #15 |
GBB Whisperer
|
Try swapping the hop up rubber to a stickier one if you want to shoot with it off... but again, I don't know why you'd want to shoot with it off. :P
Otherwise, it's known fact for this to happen with your hop up turned off. |
|
Bookmarks |
Thread Tools | |
|
|