|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
August 17th, 2012, 21:25 | #1 |
Polycarb piston base baddly chippped
Me again (see post http://airsoftcanada.com/showthread.php?p=1693316)
Playing in my gearbox in search of the culprit of my fps loss, I found that my piston has a chunk that broke off near the base of it, see photo: Full resolution photo here: https://www.dropbox.com/s/spw9q8e0qi...stonBroken.jpg The teeth are like a strip of metal that's embedded in the body of the piston, so things seems to hold pretty tight as it is anyways but I'm wondering: Can I afford to keep it as it is? I'm tempted is it doesn't look THAT bad. What could have caused this? The gear doesn't seem to have suffered from this in any ways Thanks for your inputs |
|
August 17th, 2012, 21:32 | #2 |
aka coachster
|
why couldn't you just include this with your other post?
get a new piston. they are cheap. that one looks like it is brittle and lead to more cracking chipping |
August 17th, 2012, 22:02 | #3 |
I considered them two separate issues and didn't want to pollute the other thread. Might as well help someone else having similar, put separate issues as well, so I created a second.
I'll consider buying a new piston; any recommendation? When I bought that one I did some research and it seemed to have real good reviews, didn't think I would go wrong, so I'm kind of lost now |
|
August 17th, 2012, 23:01 | #4 |
aka coachster
|
same gun. shouldn't really deserve a dedicated thread, especially when it is a no brainer to replace the piston
|
August 17th, 2012, 23:13 | #5 |
Replace it, pistons are cheap.
|
|
August 18th, 2012, 11:19 | #6 |
Alright, no brainer to replace, I get it.
Like asked earlier, any recommendations as to what piston is worth it? And the real question is "What could have caused this?" I'd rather fix the problem at the source so the next piston don't suffer the same fate... Thanks |
|
August 18th, 2012, 12:19 | #7 |
aka coachster
|
I tend to prefer the modify pistons.
|
August 18th, 2012, 12:22 | #8 |
That looks like a Storm Poly Piston w/ full steel teeth rack. Unless you are running a very high fps or high rpm setup I would wonder why it broke.
|
|
August 18th, 2012, 12:37 | #9 |
Exactly that piston; I realize I forgot to mention it in my first post, sorry about that
Gun is definitely not High FPS or ROF :/ |
|
August 18th, 2012, 12:42 | #10 |
Mr. Silencer
|
AoE not corrected.
I have that piston that I dug out of a parts bin, and it's fine doing 500fps. Last edited by Stealth; August 18th, 2012 at 12:45.. |
|
Bookmarks |
Thread Tools | |
|
|