Reseal my WA magazines and get $$$!

mmmken · May 16th, 2012, 17:02

Hi all,

I have 3 WA M4 GBBR magazines that are leaking when used with propane and I have bought three sets of new o-rings to replace the old ones, as well as 2 G&P Magpul WA GBBR magazines that are leaking as well.

I'll need them sealed before Friday night for a game - so if anyone can do it, I'll be willing to pay a premium for the urgency. PM me with a price, contact, and location.

voorhees -FWA- · May 16th, 2012, 21:32

Go to Canadian Tire, purchase Permatex Blue Basket Maker, take the plate off, run a think coat around the opening, place the o-ring back in on top of the coat of gasket maker, run another thin coat around the o-ring, screw it all back together, give it a small (second or less) dose of propane and let it sit for at least 24 hours... Good to go!

jordan7831 · May 17th, 2012, 01:19

Exactly, if you can do it tomorrow before noon that should be enough curing time for your mags! You need at least 24 hours for them to cure. I usually leave mine in the hot car (without gas) to help get them piping hot, and perhaps aid in the curing process.

mmmken · May 23rd, 2012, 23:08

Quote:

Originally Posted by voorhees -FWA-

Go to Canadian Tire, purchase Permatex Blue Basket Maker, take the plate off, run a think coat around the opening, place the o-ring back in on top of the coat of gasket maker, run another thin coat around the o-ring, screw it all back together, give it a small (second or less) dose of propane and let it sit for at least 24 hours... Good to go!

Quote:

Originally Posted by jordan7831

Exactly, if you can do it tomorrow before noon that should be enough curing time for your mags! You need at least 24 hours for them to cure. I usually leave mine in the hot car (without gas) to help get them piping hot, and perhaps aid in the curing process.

It's not too much about getting the seals fixed since I've bought brand new G&P seals from eHobby already. I can't get the damn roll-pins off the magazines for some reason. I may just need to buy an actual roll pin tool instead of small screwdrivers, lol.

Is there anyone that can do this for me? I'm still looking.

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

May 16th, 2012, 17:02	#1
mmmken Trader rating Join Date: Aug 2008 Location: Markham, Ontario	Reseal my WA magazines and get $$$! Hi all, I have 3 WA M4 GBBR magazines that are leaking when used with propane and I have bought three sets of new o-rings to replace the old ones, as well as 2 G&P Magpul WA GBBR magazines that are leaking as well. I'll need them sealed before Friday night for a game - so if anyone can do it, I'll be willing to pay a premium for the urgency. PM me with a price, contact, and location. __________________ Age Verifier - Unionville and Markham.

May 16th, 2012, 21:32	#2
voorhees -FWA- Trader rating Join Date: Oct 2008 Location: Estevan, Saskatchewan	Go to Canadian Tire, purchase Permatex Blue Basket Maker, take the plate off, run a think coat around the opening, place the o-ring back in on top of the coat of gasket maker, run another thin coat around the o-ring, screw it all back together, give it a small (second or less) dose of propane and let it sit for at least 24 hours... Good to go! Last edited by voorhees -FWA-; May 16th, 2012 at 22:08..

May 17th, 2012, 01:19	#3
jordan7831 will always be Mike Litoris in our hearts Trader rating Join Date: Jul 2004 Location: North York - Toronto	Exactly, if you can do it tomorrow before noon that should be enough curing time for your mags! You need at least 24 hours for them to cure. I usually leave mine in the hot car (without gas) to help get them piping hot, and perhaps aid in the curing process.

Reseal my WA magazines and get $$$!

Doctor's Corner