|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
January 2nd, 2012, 12:35 | #1 |
Ares microswitch reassembly problems
I recently took apart my Ares G36c's gearbox to try and fix a problem. Though now that the problem is fixed,I think, the trigger assembly came apart and I have no clue how it goes back together. Is there anyone here with experience dealing with the microswitch or with newer G36 gearboxes. Any help, or even just a really good picture would be helpful please.
|
|
January 2nd, 2012, 13:13 | #2 |
Check this video out: Ares G36 Disassembly and Reassembly Guide -ASTKilo23- - YouTube
|
|
January 4th, 2012, 03:50 | #3 |
That video wasn't helpful for my particular problem. What I need help with is the parts that transfer the motion of the trigger to the switch. If that explanation makes any sense.
|
|
January 4th, 2012, 10:41 | #4 |
Know a gent who is having the same problem with my G36C trigger. There is a small plastic cylinder that guides the part that transmits trigger pull to the micro-switch. Gun now only shoots full auto no matter what the selector switch is set at, safe still works. If you watch the actuator rod part you will note that it moves up and that causes the full auto issue.
|
|
January 4th, 2012, 15:37 | #5 |
http://s261.photobucket.com/albums/i...t=IMG_0043.jpg
Is this the cylinder piece you mentioned? I've been messing with it for a while and can't find how it should fit in. I know it's not a cylinder but the only cylinder in the thing I could find was the air nozzle. Sorry for the low quality picture nothing I have can focus that close. Last edited by ▼Stripes▲; January 4th, 2012 at 15:43.. |
|
May 4th, 2015, 15:11 | #6 |
lol no that has nothing to do with the trigger assembly. you'll probably see a hole in the back of the gearbox near where the wires run. That passes through there to hold the wires to the gearbox then the clip clips to the other side. I sadly am having the same issue as you. Wanna send me a picture of all the parts you have regarding the trigger, push bar, and micro-switch and in return I'll send you how I have put those together in mine. Maybe together we can figure this out.
|
|
May 4th, 2015, 15:20 | #7 |
Here is where the clip goes
|
|
May 4th, 2015, 15:35 | #8 |
maybe this will help more
|
|
May 4th, 2015, 16:43 | #9 |
Google level: BOSS
|
A necro post from 3 years ago... something tells me they aren't still working on the issue.
|
May 4th, 2015, 19:29 | #10 |
It was meant more for anyone that runs into the same problem and stumbles upon this post any way
|
|
|
Bookmarks |
Thread Tools | |
|
|