Gun wont fire.

Beeny · July 16th, 2011, 16:37

My gun will not shoot.
The gearbox seems to works fine.
The BB's dont get into hopup chamber and just fall down. (I've tried putting one in without mag and the BB just falls down.)

I changed the nozzle and the tappet plate. (the nozzle is good length, tappet plate is a modify tappet that came with the torus v2 gearbox)

CJay · July 16th, 2011, 17:06

It's ur tappet most likely. Probs snapped. Other option is ur nozzle may be a tad longer than the old one. My money is on the tappet wing either disconnected from the nozzle or snapped at the thin part.

Beeny · July 16th, 2011, 19:59

Well the nozzle moves when i press the trigger and ive looked it looks like it connected...but i replaced the stock tappet fro my gun with a modify one..i guess ill just try switching it back.

The gun worked fine before switching the tappet plate...even with the nozzle i am using now

Home	Forums	Register	Gallery	FAQ	Calendar
Retailers	Community	News/Info	International Retailers	IRC	Today's Posts

British Columbia	Alberta
BCAC	EAR
Op-For	JOC
Northern Arms Airsoft	Skunkworx Airsoft
Airsoft Kelowna	RAAT
Prince George Airsoft	Manitoba
Saskatchewan	MAA
SK Airsoft	Ontario
PDW	Airsoft Ottawa
South Sask Mercs	Snow Dragons
Quebec	1st Ranger Platoon
PQAC	Wolfpack Tactical
1st Pathfinders Regiment	TTAC3
Quebec Airsoft
MTX Airsoft	Atlantic
FAQc	Atlantic Airsoft

July 16th, 2011, 16:37	#1
Beeny Trader rating Join Date: Mar 2011	Gun wont fire. My gun will not shoot. The gearbox seems to works fine. The BB's dont get into hopup chamber and just fall down. (I've tried putting one in without mag and the BB just falls down.) I changed the nozzle and the tappet plate. (the nozzle is good length, tappet plate is a modify tappet that came with the torus v2 gearbox)

July 16th, 2011, 17:06	#2
CJay Trader rating Join Date: Oct 2008 Location: Belle River, ON	It's ur tappet most likely. Probs snapped. Other option is ur nozzle may be a tad longer than the old one. My money is on the tappet wing either disconnected from the nozzle or snapped at the thin part. __________________ "Creator of the Zombat Sniper - oh yeah baby"

July 16th, 2011, 19:59	#3
Beeny Trader rating Join Date: Mar 2011	Well the nozzle moves when i press the trigger and ive looked it looks like it connected...but i replaced the stock tappet fro my gun with a modify one..i guess ill just try switching it back. The gun worked fine before switching the tappet plate...even with the nozzle i am using now Last edited by Beeny; July 16th, 2011 at 20:02..

Gun wont fire.

Doctor's Corner