|
|
|
|
|
||||||||
|
|
|||||||||
| Home | Forums | Register | Gallery | FAQ | Calendar |
| Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
 |
|
|
Thread Tools |
June 18th, 2011, 19:42
|
#1 | |
|
AEG electrical issue
Description: the AEG does not fire when battery is installed and trigger pulled. To be specific, it does not do ANYTHING - no power appears to be passing through to the motor at all. Pull trigger and... nothing happens. No noise whatsoever.
What I've done so far: - Installed a different battery. Same outcome. - Checked the fuse - appears ok. (miniblade type) - Bypassed fuse and attempted to fire. Nothing. - Thought that I might have some bad wiring in the stock (this is a vfc scar-l). Ran a bypass directly to receiver's electrical contact points and attempt to fire. Nothing. Options: I'm stumped. I suppose I can pull the motor and mechbox out and start troubleshooting each part individually. Another possibility might be the trigger mechanism, but I can't see it being shorted if the fuse is still intact. Any ideas...? :? And, thanks in advance.
__________________
VFC SCAR-L - VFC SCAR SSR - KJW Hi-Capa 5.1 - CAW M79 The Three Sisters - WE G39 E/K/C Quote:
|
|
|
|
|
June 18th, 2011, 19:49
|
#2 |
|
aka coachster
|
Check your motor contacts. One likely popped off.
|
|
|
|
|
June 18th, 2011, 22:06
|
#3 |
|
Yeah I'd check that in first place too.
|
|
|
|
|
|
June 19th, 2011, 10:38
|
#4 | |
|
|
Resolved
The issue was indeed a popped connection on the motor. Blatantly obvious once I pulled the bottom cap off the pistol grip.
Thanks, All!
__________________
VFC SCAR-L - VFC SCAR SSR - KJW Hi-Capa 5.1 - CAW M79 The Three Sisters - WE G39 E/K/C Quote:
|
|
|
|
|
 |
|
||||||
| Bookmarks |
| Thread Tools | |
|
|
 |
|
