Airsoft Canada
http://triggerairsoft.com/shop/

Go Back   Airsoft Canada > Discussion > Doctor's Corner
Home Forums Register Gallery FAQ Calendar
Retailers Community News/Info International Retailers IRC Today's Posts

KWC Desert Eagle GBB PROBLEM!!

:

Doctor's Corner

Reply
 
Thread Tools
Old April 18th, 2011, 20:22   #1
avohai
 
Join Date: Apr 2011
Exclamation KWC Desert Eagle GBB PROBLEM!!

Just to clarify I'm not Canadian, so excuse my English.

I really need help, I bought my gbb two days and already gave me trouble.

This morning I went to take some shots, and realized that the balls were not coming out with force, were just "slipping" of the barrel.
When I took the barrel to look I saw that the balls appear to be stuck in the hopup, and pushed by the next time I shoot.

I'm very sad, because here where I live (Brazil) a gbb costs about $ 450, and only lasted two days without problems?

please, help me!!! :???:
avohai is offline   Reply With Quote
Old April 18th, 2011, 20:43   #2
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
have you tried turning the hopup adjustment down?

You have to take the barrel off, and use a small needle to adjust it....
__________________
Gunny_McSmith is offline   Reply With Quote
Old April 18th, 2011, 21:01   #3
avohai
 
Join Date: Apr 2011
i've tried but it did not work
avohai is offline   Reply With Quote
Old April 18th, 2011, 21:22   #4
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
mmm weird....

have you looked the the loading nozzle? is it damaged?
__________________
Gunny_McSmith is offline   Reply With Quote
Old April 18th, 2011, 21:45   #5
avohai
 
Join Date: Apr 2011
is not damaged.

I went to take some shots now (60 to be exact) and the last 20 left normal, but now came back to hang. I do not understand!
avohai is offline   Reply With Quote
Old April 18th, 2011, 21:54   #6
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
clean the barrel? oil the hopup bucking a bit?
__________________
Gunny_McSmith is offline   Reply With Quote
Old April 18th, 2011, 22:02   #7
Mitchell12
vision impaired
 
Mitchell12's Avatar
 
Join Date: Dec 2006
Location: St.John's, NL
What kind of BB's are you using?
__________________
Quote:
Originally Posted by TheAngrySniper View Post
Simultaneous climax makes me warm and fuzzy all over
Mitchell12 is offline   Reply With Quote
Old April 18th, 2011, 22:14   #8
kharyunn
 
Join Date: Mar 2010
Location: Barrie, On
I had that issue i just pushed the bbs out then worked fine but now i have 3 mags that are all leaking and i have had no problems with them before always kept good care of them one of them seems to fire 3 shots then it blows the rest of the gas out so i dont know what is wrong with that one
kharyunn is offline   Reply With Quote
Old April 18th, 2011, 23:00   #9
avohai
 
Join Date: Apr 2011
the barrel is clean, I had neither time it dirty.
lubricate it all with silicone oil.
use bb king 0.20



oh, and i use the coleman propane.
avohai is offline   Reply With Quote
Old April 18th, 2011, 23:46   #10
hattrick
NAAZ's #1 fan!
 
hattrick's Avatar
 
Join Date: Aug 2005
Location: Toronto
Send a message via MSN to hattrick
Sounds like a lemon (defect)

Upgraded hammer spring would be my first (and cheapest) guess.

Check if you can hold the hammer back with your thumb, hold down the trigger & let go of the hammer to engage the blow back action....If this works flawlessly every time. My hammer spring idea might work ^_-

Good luck - alex
__________________
Quote:
Originally Posted by Brian McIlmoyle View Post
you are going to die..

maybe not from this .. and probably not today... but I assure you, you will die
hattrick is offline   Reply With Quote
Old April 19th, 2011, 15:16   #11
avohai
 
Join Date: Apr 2011
friends reading the manual hop up I read the following sentence:
"lube oil reduce the friction on the upper side of bb bullet and reduce the effect of spin. Please don't put lube oil on bb bullet and bullet packing."

Well, I put silicone in the hop up ... I thought it was necessary.
This may be the cause of my problem?
avohai is offline   Reply With Quote
Old April 19th, 2011, 15:17   #12
avohai
 
Join Date: Apr 2011
/\ say yes please!
avohai is offline   Reply With Quote
Old April 19th, 2011, 22:01   #13
Gunny_McSmith
a.k.a. Palucol
 
Gunny_McSmith's Avatar
 
Join Date: Mar 2008
Location: MTL
nah, thats just to tell people to not overlube the hopup rubber, making the hopup effect not working....

PS: can you dry fire your gun? does the slide cycle strong?
__________________
Gunny_McSmith is offline   Reply With Quote
Old May 12th, 2011, 07:23   #14
avohai
 
Join Date: Apr 2011
yes it does the strong cycle, do not know what might be happening
avohai is offline   Reply With Quote
Old May 12th, 2011, 12:19   #15
Dart
 
Dart's Avatar
 
Join Date: Apr 2009
Location: Grande Prairie Alberta
I had one of these and it was doing close to the same thing. Pull the nozzle "block" out and check for cracks. Mine had spider cracks all over it and it was making the valve not work right.
Dart is offline   Reply With Quote
ReplyTop


Go Back   Airsoft Canada > Discussion > Doctor's Corner

Bookmarks

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Airsoft Canada
http://triggerairsoft.com/shop/

All times are GMT -4. The time now is 12:46.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.