Cold Wire Connector

[BobbyDangerous]

I should prob run a new wire but anyways my connector on my cold wire (-) Or black wire to the motor is busted off.. Where can i get a replacement.. Hell id even pay someone to actually rewire my gun if i have to.. Any help would be great.. Thanx...

[coach]

Airsoftparts or You can sometimes find them at canadian tire

[BobbyDangerous]

i'm hitting up active surplus gonna buy wire and re do everything manually..

[HKGhost]

send me the gun and I'll rewire it for you.

[BobbyDangerous]

I bought like 6 feet of wire and some connectors cost me like a buck... I'm gonna grab my soldering from work and do it prob on Monday but i'll prep it all tomorrow. I got a little bit of a thicker wire though.. I actually brought in my gearbox into the store so they could get me something that could take the power and he recommended this cable to me it's a tiny bit thicker but it will all fit... If it doesn't work then i'll pop by or something

[BobbyDangerous]

I can't get it to work i just want to beat the thing..

[Styrak]

So maybe get a gundoc to do it?

[BobbyDangerous]

Dood at this point i just want to give up on airsoft. The maintenance is retarded.. I get the gun back together and nothing just stalls doesn't fire i take it apart a thousand times and the same result doesn't fire just stalls.. I shim it properly and the same thing it just stalls. Ive gamed the thing like 4 times.. I squeeze the rigger the wires heat up.. like how bloody hard is it to make the damn thing work it isn;t that complicated it's just the dumbest thing in the world.. i've had enough of it i have invested so much damn money on a gun that just breaks..

[Steven]

Originally Posted by BobbyDangerous

Dood at this point i just want to give up on airsoft. The maintenance is retarded.. I get the gun back together and nothing just stalls doesn't fire i take it apart a thousand times and the same result doesn't fire just stalls.. I shim it properly and the same thing it just stalls. Ive gamed the thing like 4 times.. I squeeze the rigger the wires heat up.. like how bloody hard is it to make the damn thing work it isn;t that complicated it's just the dumbest thing in the world.. i've had enough of it i have invested so much damn money on a gun that just breaks..

Gundoc. Get a professional to do it, get some basic reliability upgrades, and dont worry.

Once you get a gun that works for you, you wont regret it.

[BobbyDangerous]

i've had this thing for a year now.. I rewired it i don;t get it why wont it pull the spring back? It had no prob before and it's only a 110.. The motor still works ive tested it but it just wont engage.. Ive taken it apart and gotten it to work before but now it just wont and i'm F@ckin tired of it i want to whip the gearbox across the room

[Daiviet]

get it to a gundoc. a professional one.

The first problem was opening it yourself. I'm not saying that to insult you, but its just the way things go usually. It works fine till you open it up, then after that it's never the same.

[HKGhost]

everyone thinks they know how to build a gearbox but to build it reliably is very different. it takes a lot of hard work and knowledge. this is why it cost a bit for a gundoc service.

[BobbyDangerous]

How much give me a ball park figure?

[Styrak]

Everyone has different rates. Talk to a local gundoc.

[BobbyDangerous]

Already been done