|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 21st, 2010, 21:08 | #1 |
Not a wiring problem actually...
http://www.airsoftcanada.com/showthread.php?t=112523 was my last thread and as the title suggests, my problem wasn't my wiring apparently.
I have changed all 3 wires. Haven't changed my connector, can't find a little tamiya anywhere! So, after changing my wiring, the motor DID work (without being on the gearbox). The next time I tried my gun was some minutes later, when I assembled it. Didn't fire. Not in single nor in full auto mode. :banghead: After a while, it fired 1 shot in full auto. Then nothing. Again. Note that it works (if and when it works) only in full auto mode. In Single shot, the trigger is ok but nothing happens. In full auto the trigger is ok also and sometimes -rarely- shoots, sometimes not. (I thought it might be the wiring till now) Any suggestions? You could read my previous thread for more info. P.S. If the admins/moderators in this forum feel it's better suited, they may unite my 2 threads. P.S.#2 Local gun doc is NOT an option. There ISN'T one! |
|
October 25th, 2010, 08:19 | #2 |
Please delete this thread. I found out what my problem was and I'll post it in my other thread.
Was electrical (sort of) but not wiring. |
|
|
Bookmarks |
Thread Tools | |
|
|