|
|||||||||
|
Home | Forums | Register | Gallery | FAQ | Calendar |
Retailers | Community | News/Info | International Retailers | IRC | Today's Posts |
|
Thread Tools |
October 5th, 2010, 17:35 | #1 |
G&G M4 Carbine MAX RIS length/type
Hey guys, I already know that I've posted a simular thread to this but there are some slightly diffrent questions. so answer the best to your knowlege and I very much appretiate the help guys.
So i have figured out that G&G uses a real style delta ring. what i need to know is what type of RIS/delta rings do I need there are alot that say its G&G compatible (real style delta ring's) but they have some slight diffrences. so if any of you guys can find a link to one of them from AirsoftGI or a local canadian site. And how long of a RIS will I need for the G&G M4 Carbine MAX? are all the m4 plastic handguards the same length, If so what is the length? Thanks guys, do not revive one of the old threads please :banghead: |
|
October 5th, 2010, 18:07 | #2 |
Uh, usually RIS says "For M4's" or "For m16's."
Kinda straightforward. Edit: A lot of these questions you've been asking can really be found through a bit of searching through the site or on google. Please put a bit of effort into that please. Last edited by Strelok; October 5th, 2010 at 18:39.. |
|
|
Bookmarks |
Thread Tools | |
|
|